Author Topic: SEM 056 Mag 2 Coil needed  (Read 146 times)

0 Members and 0 Guests are viewing this topic.

Offline trappermike

  • 5 cube
  • ***
  • Posts: 129
  • Karma: 17
  • 40 years mechanical and 2-Stroke racing experience
  • Location: British Columbia, Canada
Re: SEM 056 Mag 2 Coil needed
« on: January 01, 2019, 02:14:48 pm »
When Stihl brought the Mag2 out they went from 5mm screws holding the ignition plate down to 4mm screws(What a stupid idea),these commonly came loose,the flywheel sheared the heads off and sometimes maimed the ignition module. Even if the module wasn't damaged trying to easy-out a 4mm screw was hard. Use a little blue loctite on them or better yet drill and tap them out to 5mm.
Experience builds real horsepower...
When the hammer drops the BS stops:Loggers sports competition!

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
726 Views
Last post July 19, 2012, 06:07:28 pm
by Cut4fun .
5 Replies
225 Views
Last post May 03, 2013, 01:11:36 pm
by labdad
9 Replies
426 Views
Last post May 27, 2013, 06:21:39 pm
by 660magnum
12 Replies
2021 Views
Last post March 27, 2016, 01:48:26 pm
by gregh
4 Replies
844 Views
Last post September 21, 2015, 07:36:15 pm
by mikehonda
16 Replies
435 Views
Last post June 14, 2014, 08:52:05 pm
by jmester
1 Replies
167 Views
Last post July 25, 2014, 12:41:00 pm
by Cut4fun .
3 Replies
379 Views
Last post July 31, 2014, 01:06:25 am
by 3000 FPS
7 Replies
283 Views
Last post June 20, 2015, 06:04:48 pm
by Old Iron Logging
0 Replies
56 Views
Last post July 11, 2019, 05:19:33 pm
by ratface