Chainsaw Repair

I'm building a saw from a box of mix matched saws, the crank case is from an old 034,the cylinder is a New Meteor Kit for an 036
The problem is that the muffler won't fit properly without installing spacers on the lower crank case muffler mounts, Does anyone know the part Number for the  Muffler I Need.? The 034 crank case is the old style that takes the two piece clutch cover.

Thanks for the IPL, I guess clutch cover was wrong, it has the two piece plastic chain brake cover, it does't have a screw hole to hold the chain tensioner plate? thanks again

I really have no idea how old it was .The cover was smashed and I beat it out as best I could .I might have used washers to space it out but quite frankly I have forgotten what I did to it .


It was one of those deals of assembling a saw from a pile of parts .I do remember it had the small splined clutch drum which I'm not really certain an 034 came with one .The damned top cover never did fit right .

Well it gets to be a challange because often although it might be the same model they list different parts then you have to figure out what you need .I know on just the 038 alone there are at least 3 air box covers that I know of .

After a while when looking for parts it's not a question of if but rather where you put them .