Author Topic: Stihl 015L module placement (Read 144 times)

jericho40 · « **on:** April 26, 2015, 11:16:50 pm »

Hi, I am new here. This looks like a great website for chainsaw information. I want to know the best place to mount an electronic module that is replacing the points. My brother gave me this saw, it was not used very much since new. The points were badly pitted and it spit out gas. I rebuilt the carburetor and replaced the oil and gas tank gasket and cleaned everything. I replaced the fuel line and filter. Does anyone have a picture showing their module mounted and the wire route? This saw was made in Germany and it looks very well built. Any help is greatly appreciated. Jeff in east Texas

660magnum · « **Reply #1 on:** April 27, 2015, 03:46:06 am »

The electronic ignition version had the trigger module mounted where the points had been.

The points were in a little cup enclosure that was not on the electronic model.

I have the parts list and repair manual for the 015 series that I can email to you if necessary?

jericho40 · « **Reply #2 on:** April 27, 2015, 12:52:41 pm »

Hi 660 magnum, thanks for the reply. My saw originally had points. I saw they were not made anymore so I bought the electronic module to replace the points. I took the old points out. I am trying to see where others have mounted the aftermarket module. thanks Jeffery

jericho40 · « **Reply #3 on:** April 28, 2015, 10:52:54 pm »

Sorry I asked this tough question here.

jericho40 · « **Reply #4 on:** April 28, 2015, 10:57:43 pm »

I can't even see how to log out of here, could be because of the writing on the same color backgroung wood and leaves. LOL echo echo echo

3000 FPS · « **Reply #5 on:** April 29, 2015, 12:13:23 am »

Quote from: jericho40 on April 28, 2015, 10:52:54 pm

Sorry I asked this tough question here.

I have not done this conversion but didn't your module come with instructions on how to mount it. Because it should have.

You could remove the plug and put a dial indicator down the spark hole and find top dead center. Once you have that then mount the trigger you bought so that it triggers the coil for the spark at that location. Putting a degree wheel on the crank shaft will also let you find out exactly how many degrees advanced the spark will be.

Fish · « **Reply #6 on:** April 29, 2015, 09:20:48 am »

The Stihl made module and bracket fits nicely bolted on one of the legs of the coil angled diagonally upward, the aftermarket ones, not as much luck plus the most of them are different and won't work.

Fish · « **Reply #7 on:** April 29, 2015, 09:30:53 am »

trigger unit is 1118 400 1001 and the bracket is 1113 405 1901

3000 FPS · « **Reply #8 on:** April 29, 2015, 11:48:00 am »

Hey echo echo echo echo echo.

Chainsaw Repair

News:

Author Topic: Stihl 015L module placement (Read 144 times)

jericho40

Stihl 015L module placement

660magnum

Re: Stihl 015L module placement

jericho40

Re: Stihl 015L module placement

jericho40

Re: Stihl 015L module placement

jericho40

Re: Stihl 015L module placement

3000 FPS

Re: Stihl 015L module placement

Fish

Re: Stihl 015L module placement

Fish

Re: Stihl 015L module placement

3000 FPS

Re: Stihl 015L module placement

Related Topics