Author Topic: STIHL 024 HELP PLEASE.........AV, WOODBOSS AVS, OR SUPER?????  (Read 6376 times)

0 Members and 5 Guests are viewing this topic.

Offline CATDIESEL

  • 3 cube
  • *
  • Posts: 15
  • Karma: 1
i bought a real nice 024 woodboss avs that had been setting for a while. i know the "supers" are supposed to have a longer stroke? does AVS mean it is a super? i need the jug off of it, so i measured it against a standard jug. one is stihl, one is mahle. they both measure the same from the squish band to the base,  same stroke. both pistons are the same height exactly. so what gives, i want to put this top-end on a non-super saw. i just do not want to destroy anything. are the differences in the crank?  or could it just be my saw has the "super" covers on it? please give me some insight here guys,  thank you

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23989
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
I know nothhhhhinnnnggg. What little I can dig up.

Stihl 024 AVE 1.18 1.65
Stihl 024 AVS 1.26 1.65
Stihl 024 AVZ 1.26 1.73

http://chainsawrepair.createaforum.com/stihl/stihl-024/msg3818/#msg3818


More digging

024: 42mm bore, 30mm stroke, 41.6 cc
024S: 42mm bore, 32mm stroke, 44.3 cc
026: 44mm bore, 32mm stroke, 48.7 cc




Offline CATDIESEL

  • 3 cube
  • *
  • Posts: 15
  • Karma: 1
so basically they are all 42mm bore, and only a 2mm difference in the stroke.  anyone else?

Offline dutchsawdoctor

  • Gas Hotsaw
  • ******
  • Posts: 582
  • Karma: 45
  • Love repairing old saws
  • Location: Netherlands Flevoland
    • Saul's kettingzagen site
 AV means Anti Vibration Super, i can ask a friend of mine ( he works for a stihl dealer ) what he now's about the stroke if you like
Best regards,Saul
Dolmar  Stihl Solo Husqvarna Homelite Ole-mac Echo Jobu Ridgid Poulan Remington Pioneer Partner ,Danarm stanley
more chainsaw repairs Oldtimer-Motorsägen  http://pily.strojevlese.cz / http://www.sauls-kettingzagen-site.nl

Offline CATDIESEL

  • 3 cube
  • *
  • Posts: 15
  • Karma: 1
that would be great, thanks

Offline dutchsawdoctor

  • Gas Hotsaw
  • ******
  • Posts: 582
  • Karma: 45
  • Love repairing old saws
  • Location: Netherlands Flevoland
    • Saul's kettingzagen site
Will do so, it will take a while but you will get you answer  ;D
Best regards,Saul
Dolmar  Stihl Solo Husqvarna Homelite Ole-mac Echo Jobu Ridgid Poulan Remington Pioneer Partner ,Danarm stanley
more chainsaw repairs Oldtimer-Motorsägen  http://pily.strojevlese.cz / http://www.sauls-kettingzagen-site.nl

Offline dutchsawdoctor

  • Gas Hotsaw
  • ******
  • Posts: 582
  • Karma: 45
  • Love repairing old saws
  • Location: Netherlands Flevoland
    • Saul's kettingzagen site
So just, put the phone down with my friend, the woodboss avs has the 026 house and krank but cilinder and piston are the same  AV and woodboss AVS( note: it could be that the topcover might not fit after the swap and PUT THE PISTON AND CYLINDER WITHOUT THE RINGS LOSE TOGETHER AND SEE IF IT TURNS ALL THE WAY  )


The 026 has the 2 mm longer krankshaft ;)

Cheers ,
Saul
Best regards,Saul
Dolmar  Stihl Solo Husqvarna Homelite Ole-mac Echo Jobu Ridgid Poulan Remington Pioneer Partner ,Danarm stanley
more chainsaw repairs Oldtimer-Motorsägen  http://pily.strojevlese.cz / http://www.sauls-kettingzagen-site.nl

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181
Well you can do what you want .I had the bright idea of changing the cylinder on mine to an 026 but after I gutted the muffler it pepped it up enough I'm not going to do any more to it .

Now these little things never will be an oak slayer but if you can get them to breathe right they are a pretty neat little light weight .The things are light as a feather ,a tank of gas lasts forever .Up to maybe 12 inch stuff they get er done pretty good .

I don't think they would be a good cantidate for a 3 cube cookie cutter because it lacks a full 1/2 cubic inch .That's a bunch when you are only dealing with 3 cube to begin with .

Offline CATDIESEL

  • 3 cube
  • *
  • Posts: 15
  • Karma: 1
i checked, and rechecked all of the specs today. one jug is a stihl, and one is a mahle, one has open,and one has closed transfers. but the bore depth/stroke inside the jugs are within .010 of each other. is it at all possible the extra displacement comes from the crank? the crankshafts in each of the cases are definately different.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
I don't know what was said earlier but a 024 has a 30mm stroke. the 024 Super and 026 have a 32mm stroke.

EDIT: I see someone has already said that.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
263 Views
Last post March 07, 2013, 05:53:02 pm
by CG Racing
4 Replies
3800 Views
Last post January 27, 2014, 07:53:16 pm
by jmester
5 Replies
864 Views
Last post March 19, 2024, 12:12:25 pm
by Cut4fun .
2 Replies
2136 Views
Last post May 22, 2017, 04:40:07 pm
by Big_6
0 Replies
259 Views
Last post May 15, 2017, 11:10:01 am
by Seldomseen
6 Replies
777 Views
Last post August 28, 2017, 01:01:34 am
by tfox1994
1 Replies
491 Views
Last post November 18, 2019, 08:15:39 am
by Cut4fun .
5 Replies
885 Views
Last post November 04, 2021, 07:47:45 am
by Cut4fun .
1 Replies
198 Views
Last post March 19, 2024, 12:11:57 pm
by Cut4fun .
0 Replies
162 Views
Last post April 02, 2024, 06:39:10 pm
by Cut4fun .