Author Topic: Stihl 025 250  (Read 5068 times)

0 Members and 0 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl 025
« Reply #60 on: July 04, 2014, 07:52:31 pm »
The 025 and MS250 are the biggest displacement of that series of saws. The 021, 023 are also good runners of the same series.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21893
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 025
« Reply #61 on: July 04, 2014, 09:47:30 pm »
I cleaned a filthy 025 up and put a 18" bar with 3/8 lopro and like the way it runs and cuts.

Hey Welcome. You the guy from NE Ohio that used to go to GTG's with Andrew?

If so I know your full of knowledge, if you like share up where you can.  Matter fact if  you, you were into the 031's and knew them real good too if I remember.

I've had 3 025 250 come through my hands on trades and you notice Jim owns all 3 of them. He really like those little guys.
Sort of how I like my lighter but less power 3900 I used again today to take down a cherry tree. Thought about not selling as I went for it and used again today.
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl 025
« Reply #62 on: July 04, 2014, 09:55:00 pm »
The Walbro WT-215 for these from the Stihl dealers are $22.47 including the governor's share around here.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21893
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 025
« Reply #63 on: July 04, 2014, 10:03:30 pm »
The Walbro WT-215 for these from the Stihl dealers are $22.47 including the governor's share around here.

Did you try that zama that was on it with H and L. Seemed to run fine with it.
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline H 2 H

  • 5 cube
  • ***
  • Posts: 100
  • Karma: 11
  • Location: Were the Pacific Northwest Soft Woods Grow
Re: Stihl 025
« Reply #65 on: July 05, 2014, 12:22:58 am »
I've went back and fourth with both carbs and I like WT-215 better

I have WT-215 on both of mine MS 250 now
"People ask me where all my money went, I tell them half of it I spent on gambling, fast women and liquor, the other half I wasted!" W.C.

"..... nothing more funnier than watching some ole coot make a fool out of himself, especially sideways”

"You can't argue with someone that doesn't have any real life experience on the subject."

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4461
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Stihl 025
« Reply #66 on: July 05, 2014, 01:11:01 am »
The saw looks great Jim.   I would not have known it was a basket project. 
PP 505, 475, 445.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl 025
« Reply #67 on: July 05, 2014, 01:25:32 am »
Cut4fun disassembled it on his favorite workbench. A couple days later, I came along with a empty USPS Priority box and some baggies to gather up the pieces to take home. I ordered parts the next morning and started cleaning. The exterior of the parts were already clean as in all the pictures. It was the never seen insides, only seen after complete disassembly, that were dirty. The carburetor and air filter were clean as new when I got them. I didn't clean the old tank assembly as I wasn't planning on using it.

So the chainsaw was not in the basket very long.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21893
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 025
« Reply #68 on: July 05, 2014, 10:55:47 am »
The saw looks great Jim.   I would not have known it was a basket project. 

What Jim started with.

http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=274.0;attach=7149;image

I'm just not into these ones so I pass them on to folks.

I had a 029 or 029 super I tore down once. I traded it to a guy for a homemade T-post puller. Best trade I ever made. Love that heavy duty puller and gets used every year.
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4461
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Stihl 025
« Reply #69 on: July 05, 2014, 02:20:21 pm »
Kevin post a picture of that T- post puller.   I might be in need of one and could maybe duplicate what you have.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
Stihl 026 260

Started by Cut4fun « 1 2 ... 9 10 » Stihl

98 Replies
6134 Views
Last post May 13, 2019, 03:00:53 pm
by Cut4fun .
2 Replies
1301 Views
Last post March 21, 2011, 08:19:57 pm
by Cut4fun
Stihl 038

Started by Cut4fun Stihl

9 Replies
1769 Views
Last post September 30, 2019, 10:00:23 am
by Al Smith
Stihl 070 090

Started by Roanoker494 « 1 2 » Stihl

15 Replies
1431 Views
Last post December 14, 2013, 03:02:01 pm
by Cut4fun .
Stihl 024

Started by Cut4fun Stihl

5 Replies
4160 Views
Last post July 13, 2018, 06:14:59 am
by Al Smith
Stihl 034

Started by Cut4fun « 1 2 » Stihl

10 Replies
706 Views
Last post July 07, 2012, 04:41:10 am
by brokenbudget
0 Replies
263 Views
Last post December 26, 2013, 09:50:16 am
by Cut4fun .
10 Replies
571 Views
Last post September 28, 2017, 09:10:54 pm
by Cut4fun .
0 Replies
321 Views
Last post June 21, 2016, 04:24:11 pm
by Cut4fun .
0 Replies
96 Views
Last post May 29, 2019, 11:11:14 am
by Cut4fun .