Author Topic: Stihl 025 250  (Read 11342 times)

0 Members and 50 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl 025
« Reply #110 on: April 14, 2015, 01:13:05 pm »
Jim did any of those older 025 you got from me have 2 piece mufflers?

Somewhere along the later production of 025's the two piece muffler was changed over to the crimped design. Comparing my two piece and one piece crimped flange mufflers, the dog house is the same other than being captive in the later crimped design.

Looking at 025/MS250 used mufflers on Ebay, there are several iterations of how the outlet hole(s) (is)are cut under the outer front cover. I go in and make it one big hole as big as the depression anyway.

The main advantage of the two piece (non crimped) muffler over the newer style muffler is that you can get the dog house out of the two piece muffler and open up the holes. With the crimped muffler you have to reach in on the engine side of the muffler to open up the dog house holes.

The main advantage of the one piece muffler is that if you let the muffler get loose, the muffler doesn't come apart at the seam and burn a hole in your oil tank.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Stihl 025
« Reply #111 on: April 14, 2015, 01:16:57 pm »
That early flat air filter is hard to come by? The current ones set in a 90 degree adapter and all you see is what looks like a small loaf of bread for a filter.
That's the airfilter they sell now. There were two different ones before that one. One is flat and fastens up against the carb with those aluminum barrel screws. And the very first one fastened in the cover.

There's no reason you cannot use the present day filter. But if there is nothing at all on the carb, you will have to buy the 90 degree elbow too which HLS also sells.
You get a lot more RPM with that nylon mesh filter than with the flocked version that HLS sells.

Oversize stud repair for stihl 025 250 = 1123 664 2405

Copy paste stihl tech info below.

If the Standard Collar Screw is part #1127 664 2400, DG 8 thread, use Oversize Collar Screw part # 1127 664 2410, DG 9 thread, for 1127 series saws such as MS 290, MS 390
Installation:
If the thread has been stripped, the damaged mounting hole in the engine housing already has the required diameter (approx. 8 mm) and does not
need to be drilled out. Coat the DG 9 thread of the new collar screw with Red LOCKTITE 262, or equivalent and apply it squarely to the bar mounting face.
Use an 8 mm stud puller to install the collar screw into the engine housing and tighten down to a torque of 16 Nm.

If the Standard Collar Screw is 1123 664 2400, DG 8, use Oversize Collar Screw 1123 664 2405, DG 9, for 1123 series saws (021, 023, 025, MS 210, MS 250). It will also work on the 1130 (MS 170, MS180), and 1132 (MS 191T)
install same as above.

An oversize collar screw, part number 1115 664 2405, is available for alloy housings that have been stripped. The damaged hole will need to be drilled out to 8.5 mm (0.335” or letter drill Q) and rethreaded with a 10 mm by 1.5 pitch tap. Coat the threads with Red LOCKTITE 262, or equivalent, and install with the stud remover or use the double nut method. This collar screw is for the 3003 bar mount.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Stihl 025
« Reply #112 on: October 20, 2016, 01:18:31 pm »
Just got what looks like a older stihl 025 in with weird deeper darker orange covers.  Will get a pic later.

 
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Stihl 025
« Reply #113 on: October 20, 2016, 04:43:07 pm »
Compliant was smoking.

Found the bar tip was smoked and the chain was running beside the sprocket tip it self.

Also the oil tank plug missing from under the right side muffler area.

Reading up on making a plug without blocking the outlet hole to bar oil area.

copy paste info finding

Its suppose to have some sort of plug , I'm not sure what it looks like. I just made my own plug. But you dont want it to long cause it will block off the oil passage to were it oils the bar.

It looks like its suppose to be molded in with it . Doesn't look like its really suppose to come out. 

Just thread in a fine thread set screw in it

plug it

This is the pressure side, not a tank vent. Very short threaded plug with a dab of loctite

Yes, but no need for loctite. Thread in a very short grub screw. Too long and it will block the exit hole. An exact part from Stihl is the 090 vent grub screw.. 0000 951 5815 -25 cents MSRP.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Stihl 025
« Reply #114 on: October 20, 2016, 04:49:20 pm »
Found the grub screw is sold in a tank vent kit.  https://northwoodsaw.com/store/index.php?l=product_detail&p=2070

Replacement tank vent for Stihl models 08S, 070, 090, 090G. Includes grub screw.

Replaces OEM: 1108 350 5800 and 0000 951 5815  00009515815
 



Thinking a 1/4" grub screw will work too.


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Stihl 025
« Reply #115 on: October 20, 2016, 05:44:04 pm »
I thought. Heck make my own Redneck. Found a bolt cut both ends off, cut to length and made a screwdriver slot on end. Done ;)

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Stihl 025
« Reply #116 on: October 20, 2016, 06:28:25 pm »
Ordered new bar and chain 325 063 62dl and new clutch drum plus bearing.  Otherwise pretty solid older 025. 

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Stihl 025
« Reply #117 on: October 20, 2016, 06:45:29 pm »
Pics missing. Will take pic of my rednecked plug tomorrow or later.


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Stihl 025
« Reply #118 on: October 20, 2016, 07:19:01 pm »
Thanks to the inside stihlman.  ;)

The real plug fix with part number


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Stihl 025
« Reply #119 on: October 21, 2016, 12:45:29 pm »
stihl plug fix 9134 381 1230  91343811230 M 6 x 8 grub screw and red loctite

 

Related Topics

  Subject / Started by Replies Last post
Stihl 026 260

Started by Cut4fun « 1 2 ... 10 11 » Stihl

100 Replies
9930 Views
Last post June 01, 2023, 07:22:49 am
by Cut4fun .
2 Replies
2314 Views
Last post March 21, 2011, 08:19:57 pm
by Cut4fun
1 Replies
1082 Views
Last post August 21, 2012, 09:34:17 pm
by rms61moparman
4 Replies
1098 Views
Last post December 13, 2014, 09:25:41 am
by Cut4fun .
Stihl MS 290 390

Started by H 2 H « 1 2 » Stihl

11 Replies
1850 Views
Last post January 22, 2014, 07:27:43 pm
by northern boy
0 Replies
423 Views
Last post December 26, 2013, 09:27:16 am
by jsbirsette6715
0 Replies
736 Views
Last post December 26, 2013, 09:50:16 am
by Cut4fun .
10 Replies
2249 Views
Last post September 28, 2017, 09:10:54 pm
by Cut4fun .
0 Replies
661 Views
Last post June 21, 2016, 04:24:11 pm
by Cut4fun .
0 Replies
442 Views
Last post May 29, 2019, 11:11:14 am
by Cut4fun .