Author Topic: Stihl 026 Pro bogging (Read 228 times)

BHB · « **on:** November 19, 2016, 09:57:59 am »

Saw will run well for a little while & then it starts bogging. It will pick up & then bog down. Fuel filter and gas line were replaced earlier this year. Fresh mixed gas was used.

Cut4fun . · « **Reply #1 on:** November 19, 2016, 10:14:33 am »

Carb diaphragms getting stiff? Put a carb kit in it yet?

Big_6 · « **Reply #2 on:** November 19, 2016, 10:29:45 am »

Vent clogged?
Up the H screw?

BHB · « **Reply #3 on:** November 19, 2016, 10:36:02 am »

Haven't done anything to carb. Was contemplating new carb. Is carb hard to rebuild.

Haven't messed with any adjustments. Up the "h" screw ; does that mean clockwise or ccw?

Cut4fun . · « **Reply #4 on:** November 19, 2016, 12:18:48 pm »

30mins to pull and rebuild carb once you learn. Take your time and take pics as you disassemble first time. Put back together right order.

Also check impulse line for cracks.

Cut4fun . · « **Reply #5 on:** November 19, 2016, 12:22:42 pm »

If you go clockwise you will make it leaner on H. I dont recommended this if you dont know where your saw is at right now.

If anything Counter clockwise will richen it up to check.

Chainsaw Repair

News:

Author Topic: Stihl 026 Pro bogging (Read 228 times)

BHB

Stihl 026 Pro bogging

Cut4fun .

Re: Stihl 026 Pro bogging

Big_6

Re: Stihl 026 Pro bogging

BHB

Re: Stihl 026 Pro bogging

Cut4fun .

Re: Stihl 026 Pro bogging

Cut4fun .

Re: Stihl 026 Pro bogging

Related Topics