Author Topic: Stihl 026 260  (Read 5726 times)

0 Members and 0 Guests are viewing this topic.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Stihl 026 pro
« Reply #20 on: August 18, 2011, 07:25:58 pm »
So whats your plans with this saw?
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21042
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 026 pro
« Reply #21 on: August 18, 2011, 09:56:24 pm »
I'm going to compare to the PP346 45cc and EHP5000 redmax when done. I heard this topend would like a big carb and intake, but I am just going to run what came on the 026. 
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3908
  • Karma: 141
  • OHIO REDNECK
Re: Stihl 026 pro
« Reply #22 on: August 20, 2011, 06:22:04 pm »
Well got the gasket in this evening.  ;D  Learned valuable lessons I had forgotten. Dont get in a hurry putting something back together.

 I bet I done everything 2 to 3 times over   and caught that I had put the 5x12mm bolts in the cylinder when I was getting ready to put the muffler on and only had 3 5x20mm bolts .  :-X  :-[  Not only wrong bolts I was missing 1.  Never found it and I keep the bolts in a magnetic bowl.
Went to throw a 3/8 7 on it and square CL and forgot about the mini stihl drum  >:(  so I had to put a mini stihl 325 8 and run the 325 RM2 063 chain I had for that bar. 

Gobs of compression and might put the de-comp in it instead of the plug. Just in case someone down the road may need it someday.

Soon as I get the mini 3/8 7 or oregon 3/8 7 drum set up I will test and compare.

What I was thinking and saying to myself.

http://www.youtube.com/watch?v=85V1Xewv20k&feature=related


REDNECK Saw Repair

Offline rgclmc

  • 4 cube
  • **
  • Posts: 35
  • Karma: 1
  • Location: NW Pa
Re: Stihl 026 pro
« Reply #23 on: August 20, 2011, 08:36:22 pm »
I call myself that at least 10 times a day. ;D

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3908
  • Karma: 141
  • OHIO REDNECK
Re: Stihl 026 pro
« Reply #24 on: August 20, 2011, 11:09:13 pm »
Gets up and runs to barn on a thought. Found my mini 3/8 7  8) . I forgot I had put it on the 028 super.  :D :D  :P
REDNECK Saw Repair

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2696
  • Karma: 155
Re: Stihl 026 pro
« Reply #25 on: August 21, 2011, 12:27:33 pm »
I've made base gaskets .Simpley because I had cut the base down down somewhat off the mark of where I wanted it to be ,duh .

All kinds of things work .The cover from National Geographic,Budweiser cartons ,even Mountain Dew .I've even used regular gasket paper .Imagine that . ;D

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3908
  • Karma: 141
  • OHIO REDNECK
Re: Stihl 026 pro
« Reply #26 on: August 21, 2011, 04:04:13 pm »
I had homemade gasket on hand Al, but it was to thick and other stuff I had was to thin. This pop up piston and cylinder was cut to run a .5mm gasket and oem had one to set the squish nice and tight without hitting.  ;)

I just tested the redmax 5000 , husky 346 OE 45cc, stihl 026 pro 44mm.

I ran the redmax, husky, stihl in that order and all had air filters and ran same stihl chain out of the box sharp 3/8 RSC.  All 3 were tuned fat low 14 to 14.4 and running 3/8 7T rim.

I could tell the difference in the 026 compared to the 5000 and 346 from the warm up. Throttle response wasnt crisp and snappy like the other 2 and just a different sounding motor. Have a good idea why, but I dont care. It's going to be used for a work saw and lot better then a stock 026.  ;D

 Fastest 2 times from 4 cuts in 12 inch round poplar.

redmax 5000  2.66 2.69
husky OE 346  2.60 2.65
stilh 026         3.44  3.47
REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21042
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 026 pro
« Reply #27 on: August 21, 2011, 04:08:47 pm »
Just thought of something. The 5000, 346, had fine mesh filters and the 026 had the flocked filter.   Might check the 026 without a filter someday just to see.
REDNECK Saw Repair Getter Done

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2696
  • Karma: 155
Re: Stihl 026 pro
« Reply #28 on: August 21, 2011, 04:43:25 pm »
The flocked of course is a better filter but it's more restrictive .

Interestingly though I sometimes forget what I'm doing although I know better .Last week I got into some big,I mean huge trees which had some rot .All the suddened my good old 038 Mag took a fit on me .After fiddling around way too long on it I finally figured out the flocked filter was plugged tighter than a bulls azz at fly time ,duh .Geeze and I call myself a sawman but sometimes wonder about that . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21042
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 026 pro
« Reply #29 on: August 21, 2011, 08:47:17 pm »

 stihl chain out of the box sharp 3/8 RSC.  tuned fat low 14 to 14.4 and running 3/8 7T rim.

I could tell the difference in the 026 compared to the 5000 and 346 from the warm up. Throttle response wasnt crisp and snappy like the other 2 and just a different sounding motor. Have a good idea why, but I dont care. It's going to be used for a work saw and lot better then a stock 026.  ;D

 Fastest 2 times from 4 cuts in 12 inch round poplar.  stilh 026         3.44  3.47

http://www.youtube.com/watch?v=nvH3pjKkpUI
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Stihl 034

Started by Cut4fun « 1 2 ... 8 9 » Stihl

82 Replies
3842 Views
Last post April 23, 2019, 01:19:02 am
by Aussie
2 Replies
1192 Views
Last post March 21, 2011, 08:19:57 pm
by Cut4fun
2 Replies
570 Views
Last post March 29, 2011, 03:56:16 pm
by Cut4fun
066 Stihl

Started by man of stihl « 1 2 3 4 » Stihl

30 Replies
1896 Views
Last post September 27, 2015, 08:07:15 am
by Cut4fun .
Stihl 025 250

Started by man of stihl « 1 2 ... 13 14 » Stihl

133 Replies
4459 Views
Last post October 07, 2018, 11:57:06 am
by Cut4fun .
1 Replies
645 Views
Last post May 13, 2011, 04:32:43 pm
by bloodontheice
Stihl 064

Started by Cut4fun « 1 2 » Stihl

13 Replies
893 Views
Last post July 28, 2012, 11:17:28 pm
by Cut4fun .
0 Replies
198 Views
Last post December 26, 2013, 09:50:16 am
by Cut4fun .
10 Replies
344 Views
Last post September 28, 2017, 09:10:54 pm
by Cut4fun .
0 Replies
265 Views
Last post June 21, 2016, 04:24:11 pm
by Cut4fun .