Author Topic: Stihl 026 260 (Read 6175 times)

Cut4fun . · « **Reply #80 on:** July 08, 2018, 07:26:58 pm »

Broken case and limiter. Redneck fix after putting other side back right.

Cut4fun . · « **Reply #81 on:** August 06, 2018, 01:36:30 pm »

Female firewood cutters 026 pro saw dropped off. Story is she bought new due to loaning out here 029 and they never returned it. Just had to save the pics.
Need to talk to her about her mix type and water in tank too. As poured out and pic taken min afterwords and could see it separating.

Cut4fun . · « **Reply #82 on:** September 13, 2018, 02:54:35 pm »

96400031190 Oil seal 12x20x5
96400031600 Oil seal 15x29.6x4

leec · « **Reply #83 on:** September 22, 2018, 03:23:47 pm »

Help please!
Trying to remove the carb on my 024/6. The throttle rod seems to stop the removal. Do you have to take the handle off?

Cut4fun . · « **Reply #84 on:** September 23, 2018, 11:45:16 am »

Quote from: leec on September 22, 2018, 03:23:47 pm

Help please!
Trying to remove the carb on my 024/6. The throttle rod seems to stop the removal. Do you have to take the handle off?

I take that black rear handle cover off and remove the linkage on that end.

Cut4fun . · « **Reply #85 on:** December 09, 2018, 11:43:39 am »

Does this look like to much space to you 026 gurus on the choke? If it aint the choke it maybe a stiff diaphragm. Everything else checks out.

Cut4fun . · « **Reply #86 on:** December 09, 2018, 02:12:00 pm »

Ordered a new oem air filter. Guys on CRG said the aftermarket ones still have the issue this one oem one is having.

Cut4fun . · « **Reply #87 on:** December 14, 2018, 11:17:28 am »

Why I always test cut before letting saws go back. 026 was cutting out in cut like I hit kill switch. Back and forth.
Dug in found bare coil wire in one spot and one of the little wires bare in one spot. Problem solved.
True story local dealer sent saw back out with friend. Said good to go. He put wrong coil in it wouldnt start. Know good and well he didnt freaking test it.

I get all of this guys business since he found out I work on saws. Test them saws before calling it good to go. JMO

farmboy · « **Reply #88 on:** December 14, 2018, 09:45:15 pm »

Totally agree! I make my customers start saw, etc. before leaving.
Shep

Cut4fun . · « **Reply #89 on:** January 07, 2019, 10:34:14 pm »

026 in for wonky WT-22 carb nothing helps idle tuning and start. But good to go once running and full throttle.

Chainsaw Repair

News:

Author Topic: Stihl 026 260 (Read 6175 times)

Cut4fun .

Re: Stihl 026

Cut4fun .

Re: Stihl 026

Cut4fun .

Re: Stihl 026

leec

Re: Stihl 026

Cut4fun .

Re: Stihl 026

Cut4fun .

Re: Stihl 026

Cut4fun .

Re: Stihl 026

Cut4fun .

Re: Stihl 026

farmboy

Re: Stihl 026

Cut4fun .

Re: Stihl 026

Related Topics