Author Topic: Stihl 030  (Read 402 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Stihl 030
« on: July 09, 2018, 03:52:46 pm »
Stihl 030 basically a 031? Never worked on a 030 but several 031. So thought I better ask.


REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Online ray benson

  • 5 cube
  • ***
  • Posts: 128
  • Karma: 62
  • Retired Industrial Electrician
  • Location: Indiana
Re: Stihl 030
« Reply #2 on: July 09, 2018, 08:37:32 pm »
 Out of the 030,031,032 service manual.
 The previous service manual for models 030 and 031 has been discontinued. As the models are identical in design, the  repair procedures in this manual can be used on the 030,031.
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 030
« Reply #3 on: July 10, 2018, 07:55:21 am »
Looking around on mike acres site. It has 030 45cc - 031 48cc and 032 51cc is that right?
Know it is 50/50 the info could be wrong there. Why asking.

Still dont know if this is right. Just what I am finding on 50/50 right acres site. 
030 = 42x32, 031 = 44x32 and 032 45x32. So bore is shown larger by 2mm on 30 to 031 and 3mm bigger on 32
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 030
« Reply #4 on: July 10, 2018, 08:19:26 am »
Save Willard's ad pic from CR-G.

REDNECK Saw Repair Getter Done

Online ray benson

  • 5 cube
  • ***
  • Posts: 128
  • Karma: 62
  • Retired Industrial Electrician
  • Location: Indiana
Re: Stihl 030
« Reply #5 on: July 10, 2018, 09:07:18 am »
The 032 ipl lists a 45 mm piston
The 030,031 ipl lists a 44mm and 45 mm piston - ipl is dated 2004
The first listing in the Intertec chainsaw manual for the 030 and 031 is the 4th edition(1974). It lists the 030 piston as 42 mm and 031 piston as 44mm??? wtf
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 030
« Reply #6 on: July 10, 2018, 11:03:24 am »
No clue here. I dont need to go that deep in this one so I wont find out.
REDNECK Saw Repair Getter Done

Offline DNX800

  • 4 cube
  • **
  • Posts: 35
  • Karma: 14
Re: Stihl 030
« Reply #7 on: July 11, 2018, 04:39:22 am »
The 45mm piston from the 032 can be used as a replacement part on the 030, 031. Because of having less spare parts and more storage capacity, the 44mm piston and cylinder were dropped. Found that information on an old bulletin.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2740
  • Karma: 162
Re: Stihl 030
« Reply #8 on: July 11, 2018, 05:28:09 am »
My experience with this design is rather limited .One that was in a dealers dead pile and one a neighbor bought that was badly out of tune .On the later I tuned it in and all things considered it didn't cut too bad .

Offline dpjones

  • 5 cube
  • ***
  • Posts: 128
  • Karma: 18
Re: Stihl 030
« Reply #9 on: July 11, 2018, 01:05:35 pm »
A close friend bought a 031 new in the late 70's I think, I was logging my property with an XL-12 and a 045 and used his 031 a time or two and liked it better than what I had.
I think points an condenser was high priced and if not set with a light or ohm meter wouldn't run good at all, he never did change it over to electronic, still has it and uses it some too.
DJ
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1290 Views
Last post March 21, 2011, 08:19:57 pm
by Cut4fun
Stihl 034 ??

Started by Cut4fun « 1 2 » Stihl

13 Replies
2048 Views
Last post November 28, 2011, 09:29:18 pm
by Al Smith
stihl 066

Started by tradguy « 1 2 3 » Stihl

20 Replies
1653 Views
Last post March 11, 2012, 01:25:23 pm
by tradguy
STIHL 441 C-M

Started by man of stihl « 1 2 3 » Stihl

25 Replies
1721 Views
Last post March 14, 2012, 08:53:30 pm
by WoodChuckr
7 Replies
670 Views
Last post May 20, 2012, 05:15:22 pm
by Cut4fun .
Stihl 034

Started by Cut4fun « 1 2 » Stihl

10 Replies
699 Views
Last post July 07, 2012, 04:41:10 am
by brokenbudget
Stihl 064

Started by Cut4fun « 1 2 » Stihl

13 Replies
954 Views
Last post July 28, 2012, 11:17:28 pm
by Cut4fun .
1 Replies
561 Views
Last post August 21, 2012, 09:34:17 pm
by rms61moparman
4 Replies
527 Views
Last post December 13, 2014, 09:25:41 am
by Cut4fun .
0 Replies
256 Views
Last post December 26, 2013, 09:50:16 am
by Cut4fun .