Author Topic: Stihl 041 Carb Problem  (Read 2314 times)

0 Members and 25 Guests are viewing this topic.

Offline Dh1984

  • 5 cube
  • ***
  • Posts: 87
  • Karma: 1
  • Location: Union County Tn

  • Total Badges: 17
    Badges: (View All)
    Third year Anniversary Level 4 Second year Anniversary Karma Search Level 3
Stihl 041 Carb Problem
« on: December 21, 2011, 09:39:23 pm »
i just bought a carb and some other parts (to get my new to me 041 farmboss stihl going again) from a fellow on Arborist site.the carb bought has been rebuilt and cleaned before shipped to me.but one problem i got is when i start it and try to retune it like he told me too.it don't do nothing but over load even when both screws all the way in. and it never does get full throttle.but it will set and idle for about 10 to 12 seconds i guess and then choke out.i knew how to post a video i would post one.but it will spit mix out the top of the carb and out the muffler. i'm about to the end of my ropes with this thing. i'm about to take it to the stihl dealer tomarrow and see what he can do.But i wanted to come on here first and see if anyone knew what i can do to get it going like it should.
Echo Cs8000/Echo Cs3000/Echo Cs345/ Poulan295 FarmHand /Homelite PS33/ Homelite 42cc/Homelite Xl

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl 041 Carb Problem
« Reply #1 on: December 21, 2011, 09:46:31 pm »
Sounds like the metering valve on the regulator side of the carb is stuck open or set up wrong?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Dh1984

  • 5 cube
  • ***
  • Posts: 87
  • Karma: 1
  • Location: Union County Tn

  • Total Badges: 17
    Badges: (View All)
    Third year Anniversary Level 4 Second year Anniversary Karma Search Level 3
Re: Stihl 041 Carb Problem
« Reply #2 on: December 21, 2011, 09:49:22 pm »
Ah I See how do you set the metering valve? and what does it suppost to set on?
Echo Cs8000/Echo Cs3000/Echo Cs345/ Poulan295 FarmHand /Homelite PS33/ Homelite 42cc/Homelite Xl

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl 041 Carb Problem
« Reply #3 on: December 21, 2011, 10:05:51 pm »
This is a layman site and he calls the metering valve of the regulator the needle valve

http://tech.flygsw.org/walbro_tuneup.htm
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl 041 Carb Problem
« Reply #4 on: December 21, 2011, 10:10:48 pm »
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Dh1984

  • 5 cube
  • ***
  • Posts: 87
  • Karma: 1
  • Location: Union County Tn

  • Total Badges: 17
    Badges: (View All)
    Third year Anniversary Level 4 Second year Anniversary Karma Search Level 3
Re: Stihl 041 Carb Problem
« Reply #5 on: December 21, 2011, 10:13:19 pm »
oh i c well the carb i got one it is a tilly and i can't figure out how to post a video of it to show you how it runs at WOT.
Echo Cs8000/Echo Cs3000/Echo Cs345/ Poulan295 FarmHand /Homelite PS33/ Homelite 42cc/Homelite Xl

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl 041 Carb Problem
« Reply #6 on: December 21, 2011, 10:20:25 pm »
The Tillotson is set up pretty much the same as a Walbro

You need to know which model Tillotson you have like a "HL" for example

http://www.tillotson.ie/techinfo-downloads.php
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Dh1984

  • 5 cube
  • ***
  • Posts: 87
  • Karma: 1
  • Location: Union County Tn

  • Total Badges: 17
    Badges: (View All)
    Third year Anniversary Level 4 Second year Anniversary Karma Search Level 3
Re: Stihl 041 Carb Problem
« Reply #7 on: December 21, 2011, 10:29:53 pm »
ok i'll go and see what kind i got and post it.
Echo Cs8000/Echo Cs3000/Echo Cs345/ Poulan295 FarmHand /Homelite PS33/ Homelite 42cc/Homelite Xl

Offline Dh1984

  • 5 cube
  • ***
  • Posts: 87
  • Karma: 1
  • Location: Union County Tn

  • Total Badges: 17
    Badges: (View All)
    Third year Anniversary Level 4 Second year Anniversary Karma Search Level 3
Re: Stihl 041 Carb Problem
« Reply #8 on: December 21, 2011, 10:37:53 pm »
i think it is a HS Tilloson
Echo Cs8000/Echo Cs3000/Echo Cs345/ Poulan295 FarmHand /Homelite PS33/ Homelite 42cc/Homelite Xl

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl 041 Carb Problem
« Reply #9 on: December 21, 2011, 10:45:29 pm »
Here's the manual for the HS series

http://www.tillotson.ie/docs/techinfo_HS_US.pdf
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
15 Replies
902 Views
Last post November 01, 2012, 02:35:13 am
by pete
16 Replies
1363 Views
Last post January 12, 2014, 02:51:09 am
by 660magnum
35 Replies
3251 Views
Last post November 11, 2016, 11:28:35 pm
by pete
20 Replies
2857 Views
Last post May 19, 2017, 04:08:15 am
by sharkey
8 Replies
1298 Views
Last post June 10, 2016, 10:15:36 pm
by mdavlee .
3 Replies
465 Views
Last post April 26, 2017, 07:00:06 am
by Jacks54
2 Replies
1737 Views
Last post May 22, 2017, 02:50:56 pm
by Cut4fun .
5 Replies
1536 Views
Last post August 10, 2017, 11:40:53 am
by Spike47
1 Replies
369 Views
Last post May 13, 2018, 04:53:20 pm
by Cut4fun .
2 Replies
414 Views
Last post September 14, 2022, 09:29:38 pm
by 3000 FPS