Author Topic: Stihl 042 ignition timing with no flywheel keys!  (Read 198 times)

0 Members and 0 Guests are viewing this topic.

Offline imquattro

  • 3 cube
  • *
  • Posts: 12
  • Karma: 3
Stihl 042 ignition timing with no flywheel keys!
« on: October 30, 2017, 09:01:14 pm »
Working on the two 042 saws. Current symptom: weak under load (addressed case leaks, compression 150+, carbs working fine, fuel lines and intake boots good).
Neither have flywheel keys and both were not timed properly.
Timing should be 2.5mm BTDC according to: http://www.acresinternet.com//8ea47c2d0942227788256ba20048
>>>>Question:<<<<
Where does 2.5mm put it in degrees? Where is that measured? at the outer edge of the flywheel/case or at the coil? There are no marks on the case or flywheel. When the keyway and flywheel are lined up they are pointing directly at the center of the coil -seems odd.
Whats a good rule of thumb for these? 25+ degrees advance when running right?

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21880
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 042 ignition timing with no flywheel keys!
« Reply #1 on: October 30, 2017, 09:23:12 pm »
@Al Smith I was thinking you knew about these.

Nate your link not working. Thinking it was this one. http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/8ea47c2d0942227788256ba2004878e7?OpenDocument
REDNECK Saw Repair Getter Done

Offline imquattro

  • 3 cube
  • *
  • Posts: 12
  • Karma: 3
Re: Stihl 042 ignition timing with no flywheel keys!
« Reply #2 on: October 30, 2017, 09:59:53 pm »
Yep, that link looked funky!
Thanks Kevin!

Offline breese

  • 3 cube
  • *
  • Posts: 10
  • Karma: 3
  • Location: Chicagoland, USA
Re: Stihl 042 ignition timing with no flywheel keys!
« Reply #3 on: October 31, 2017, 05:46:33 am »

Where does 2.5mm put it in degrees? Where is that measured? at the outer edge of the flywheel/case or at the coil? There are no marks on the case or flywheel. When the keyway and flywheel are lined up they are pointing directly at the center of the coil -seems odd.
Whats a good rule of thumb for these? 25+ degrees advance when running right?

The 2.5mm = 0.098 inches before TDC so that equates to the Piston location.
When the key is used for the flywheel, it will align the coils Fire sensor to align with the sensor on the flywheel.
Like Like x 1 View List

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Stihl 042 ignition timing with no flywheel keys!
« Reply #4 on: November 02, 2017, 06:30:13 am »
FWIW the 042 and 048 ignitions are self advancing or at least the SEM type are .I'm not sure about the Bosc .
How it works is a long drawn out affair to explain .
I have 2 048's and one 042 but frankly speaking although I have both ignition types I'm not certain which has which .
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
170 Views
Last post September 01, 2013, 02:47:30 pm
by Fish
Ignition Stihl 064

Started by Hook « 1 2 3 » Stihl

25 Replies
1169 Views
Last post January 19, 2014, 07:50:21 pm
by roostersgt
2 Replies
338 Views
Last post November 11, 2014, 12:21:36 pm
by KilliansRedLeo
6 Replies
223 Views
Last post November 02, 2015, 07:43:33 pm
by Al Smith
6 Replies
337 Views
Last post January 02, 2016, 11:17:33 am
by Al Smith
4 Replies
371 Views
Last post July 31, 2016, 04:56:06 pm
by Cut4fun .
5 Replies
149 Views
Last post July 20, 2016, 07:33:47 pm
by 1manband
21 Replies
2471 Views
Last post October 17, 2016, 08:19:31 pm
by dannyupsolate
0 Replies
180 Views
Last post October 12, 2016, 02:12:43 pm
by Cut4fun .
1 Replies
124 Views
Last post January 01, 2019, 09:37:01 am
by Al Smith