Chainsaw Repair

Thanks for info.


gunrac if your up this way again give me heads up and I can burn you a full 2012 medicat dvd you can install on your puter.

Sounds good Kevin, and TY.

Well I finally got that rascal out......reassembled ......good to go..... Started out using round washer's as a backstop to pull against ......bent 3 of them. Just couldn't get a square pull......I found a socket that would have served as a guide, but then could not come up with a section of M5 threaded rod or a long enough bolt that would work.

Thought I would give it 1 more shot before ordering the correct tool that was needed.....I ended up grinding a good steel washer down to a rectangular shape..... This fit in between the guides for the tank and kept me square w/the pump.......Also, used 1 of the bolts that held the gear box together.......it was just barely long enough. The pic show my pulling rig w/the other showing how plugged up everything was..

Nice work figuring it out.