Author Topic: Stihl 180 c be  (Read 630 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #10 on: October 21, 2015, 06:53:42 pm »
Yep 16" 043 55DL and the guy was running 050 56DL on it. No biggie on DL but thinking he must have wore bar just enough to work. I just test ran it with it on there and it did work.

Going to ask dad if he would prefer a 12" or 14" bar and will use 050 chain.

Took pics of the tool-less clutch cover and tensioner set up. Better then poulans version, but I still dont care for it.

Little lean for my klotz 32:1 mix but dad will run dino 40 or 50:1 so hopefully good then.  What is the max WOT rpm's of these things?

I did remove spark screen.

I will say this. This thing will eat that new echo 310 I had here.
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl 180 c be
« Reply #11 on: October 21, 2015, 07:21:32 pm »
WOT 14,000 per the SM

And that's pulling the chain
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #12 on: October 21, 2015, 07:38:18 pm »
WOT 14,000 per the SM

And that's pulling the chain

Thanks
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #13 on: October 21, 2015, 07:39:24 pm »
Just ordered dad a 14" 050 bar.   Per his wants over 12  :'(
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #14 on: October 21, 2015, 09:06:31 pm »
Going to sell or trade off that new stihl woodsman chainsaw case that came with this and the 16" 043 3/8LP 55DL bar.

The case fits 170 - 460 with 20" bar.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #15 on: October 22, 2015, 12:36:41 pm »
Anyone have a usable 12" LP 050 they want to trade for the 043 16" ? Just idea running through my head to try.

Tool less tensioner.


REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #16 on: October 26, 2015, 06:03:10 pm »
I ordered bar 3005 000 4809 .   Today I received a bar but not that number, it is 3005 003 6309 .

Thing I noticed is it dont have any bar oiler holes in it like the 30050004809 bar. Also the tail mount is a little narrower on the 30050036309.

I still think it will work but need to do some drilling now.

What was the bar for being they are both 3/8LP picco 050 50DL.  Stihl bar made in Sweden

3005 003 6309
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl 180 c be
« Reply #17 on: October 26, 2015, 07:19:24 pm »
Original Rollomatic "H"  not the current Rollomatic "E"

The 30050036309 is not in the current catalog.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #18 on: October 26, 2015, 07:32:50 pm »
Original Rollomatic "H"  not the current Rollomatic "E"

The 30050036309 is not in the current catalog.

Yep older stihl bar style. But wonder what they fit? 

I think if I drill oiler holes it will work, even though mount is a tad narrower.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 180 c be
« Reply #19 on: October 27, 2015, 04:01:11 pm »
Being tail mount was little narrower. I went little closer to rails when drilling the oiler holes. Tested fitted and oiles great.

One thing I noticed when putting the little bolt in the too-less tensioner deal through the bar to hold it all together. The bar tensioner holes were a little bigger on this older bar. The head on bolt pulled right through while tightening.  I thought WTH!   :D
I put a small flat washer on it to fix this and all is well.

REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1299 Views
Last post March 21, 2011, 08:19:57 pm
by Cut4fun
stihl 066

Started by tradguy « 1 2 3 » Stihl

20 Replies
1663 Views
Last post March 11, 2012, 01:25:23 pm
by tradguy
STIHL 441 C-M

Started by man of stihl « 1 2 3 » Stihl

25 Replies
1729 Views
Last post March 14, 2012, 08:53:30 pm
by WoodChuckr
7 Replies
672 Views
Last post May 20, 2012, 05:15:22 pm
by Cut4fun .
Stihl 034

Started by Cut4fun « 1 2 » Stihl

10 Replies
706 Views
Last post July 07, 2012, 04:41:10 am
by brokenbudget
Stihl 064

Started by Cut4fun « 1 2 » Stihl

13 Replies
957 Views
Last post July 28, 2012, 11:17:28 pm
by Cut4fun .
1 Replies
563 Views
Last post August 21, 2012, 09:34:17 pm
by rms61moparman
4 Replies
528 Views
Last post December 13, 2014, 09:25:41 am
by Cut4fun .
Stihl MS 290 390

Started by H 2 H « 1 2 » Stihl

11 Replies
1089 Views
Last post January 22, 2014, 07:27:43 pm
by northern boy
0 Replies
262 Views
Last post December 26, 2013, 09:50:16 am
by Cut4fun .