Author Topic: Stihl 362 C-M ported v/s Solo 665 stock  (Read 682 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Stihl 362 C-M ported v/s Solo 665 stock
« on: August 17, 2014, 09:41:18 am »
Dex tested his woods ported 362 CM against his stock 665. 

Quote from: DexterDay
I finally got around to testing the 665 and my Mastermind 362C-M today. After seeing Chvymn99 results,  I had to see for myself.  His 665 beat a ported 562xp.  Not by much. But by a little. :)
Both saws had new Stihl RS chains.. Brand new. Stihl had an 18" Sugi bar and 7 pin rim and Solo had 20" Forester bar and 7 pin rim.
The Cant has gotten considerably harder. I have a new 10" x 10" x 10' Cant that will be done soon. :)
The results? Well? See for yourself. I will post the times I got from watching the video with the stopwatch in a bit. :dex:
Steven, open that box up buddy!! These are something special! !
Mastermind MS 362C-M and a stock Solo 665:

http://youtu.be/PwMMvM_6cqc



REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #1 on: August 17, 2014, 09:42:43 am »
Dex times them from video.  Also stated 2.5 tanks through the 665  and 5-6 through the 362. So none are broken in. But the 362 is woods ported. 

MS 362C-M
1- 6.8 sec
2- 6.1 sec
3- 6.2 sec

Solo 665
1- 6.2 sec
2- 5.7 sec
3- 5.5 sec
REDNECK Saw Repair Getter Done

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #2 on: August 17, 2014, 10:05:56 am »
Awesome!!

The best thing about the 665 is it can be a 75cc, 79cc, 81cc or 85cc saw in a couple hours too... :)

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #3 on: August 17, 2014, 10:25:15 am »
Does the 665 fit into the 4 cube class?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #4 on: August 17, 2014, 10:26:52 am »
Does the 665 fit into the 4 cube class?

IMO if measured it will be just a hair over legal.   I posted the cc some where. Let me look.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #5 on: August 17, 2014, 10:34:56 am »
Does the 665 fit into the 4 cube class?

IMO if measured it will be just a hair over legal.   I posted the cc some where. Let me look.

Finally found it.

Make sure legal with just being over the 4ci by a hair

665   =  65.955

 4ci = 65.548   You know how some shows can be.
REDNECK Saw Repair Getter Done

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #6 on: August 17, 2014, 11:32:31 am »
I thought that it was just a tiny bit over.

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #7 on: August 17, 2014, 12:16:35 pm »
OH YEH!!  665was my bet! Just think how it will run with the right man grinding on it a little.
Shep

Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #8 on: August 17, 2014, 12:26:14 pm »
That 362 needs another 5-10 tanks through it to loosen up.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #9 on: August 17, 2014, 01:25:09 pm »
He said he would post the test again when both are broke in. Remember the 665 has only 2.5 tanks through it.  362 has 5-6 already.

He said the CM 362 was turning 14plus and the 665 13K out of the wood.  Wonder what rpm's were showing in the cut and guessing he ran 7T on both.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
13 Replies
1033 Views
Last post March 10, 2011, 07:15:11 pm
by SawTroll
2 Replies
544 Views
Last post September 03, 2011, 11:53:35 am
by Cut4fun
7 Replies
820 Views
Last post February 19, 2015, 07:05:49 pm
by mdavlee .
6 Replies
3222 Views
Last post September 02, 2012, 11:23:47 am
by ms460woodchuck
11 Replies
526 Views
Last post December 06, 2012, 07:08:32 am
by Al Smith
1 Replies
165 Views
Last post November 08, 2014, 06:33:26 am
by Moparmyway
29 Replies
599 Views
Last post September 28, 2015, 12:21:17 pm
by aclarke
49 Replies
1275 Views
Last post May 18, 2017, 07:24:13 am
by Cut4fun .
7 Replies
146 Views
Last post January 28, 2017, 09:39:04 pm
by Cut4fun .
2 Replies
262 Views
Last post February 16, 2018, 10:41:31 pm
by farmboy