Author Topic: Stihl 362 C-M ported v/s Solo 665 stock  (Read 682 times)

0 Members and 0 Guests are viewing this topic.

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #10 on: August 17, 2014, 01:39:07 pm »
We are finding about 20-25 tanks to get the most out of new Stihl saws. That said, it should be the same for the Solo also. Beating a 562 was no surprise, beating a ported 362 is. I had 2 ported 361s that I could cut firewood  with all day that would smoke that 665.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #11 on: August 17, 2014, 02:03:07 pm »
Not trying to stir anything up at all here but here is my observation.
I am not at all surprised that the 665 could be the fastest 65cc stock saw there is. But to beat a ported saw close to the same size makes me wonder......
I have ran a friends 681 and it is truly the fastest stock 5 cube saw there is IMO. It was faster than the jred 2186 I had at the time and faster than my stock dolmar 7900 I have now. But in no way is it faster than his ported 2171`s, my ported husqvarna 372 or my ported 7900.
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21860
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #12 on: August 17, 2014, 04:15:34 pm »
Got some stock 681 gtg racing times from my gtg's and maybe others. I have a stack of them.

3 cuts in 8x8 hotstart over wood

Nate stock 681  4.72

dozerdan 375 my old saw 4.15

? 046 8.35
? 575 8.58
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21860
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #13 on: August 17, 2014, 04:24:11 pm »
another racing gtg

Bill stock 681 in 10x10  hot start over wood

PP375  4.72
EHP372 5.04
stock 681 5.97
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21860
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #14 on: August 17, 2014, 04:27:06 pm »
Thats all I can see with a stock 681 chained against ported saws chained.

There were many other folks ported saws beat by the stock 681's Just didnt list them.  ;)
REDNECK Saw Repair Getter Done

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #15 on: August 18, 2014, 02:20:54 am »
Did you ever have one of those days where everything you touched turned to chit? Perhaps it was one of those days for the builder when that saw was ported.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #16 on: August 18, 2014, 07:12:02 am »
Did Romeo or Andy/redprospector win the build off way back when?

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #17 on: August 18, 2014, 09:44:24 am »
Romeo (shawn), me and Dean (Washington?).  Test wood was around 25"  with 28" bars.  All three saws were within a few tenths.  Think Romeo won by a margin.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #18 on: August 18, 2014, 12:28:22 pm »
I thought Romeo did win. Last I heard he was full into dirt bikes for his kids

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Stihl 362 C-M ported v/s Solo 665 stock
« Reply #19 on: August 18, 2014, 01:43:25 pm »
Yep, good guy and quite a character!  He posted a vid years ago on Racesaws of him doing a root canal on one of his buddies with porting tools and a bottle whiskey!!!!!   Lol 

 

Related Topics

  Subject / Started by Replies Last post
13 Replies
1033 Views
Last post March 10, 2011, 07:15:11 pm
by SawTroll
2 Replies
544 Views
Last post September 03, 2011, 11:53:35 am
by Cut4fun
7 Replies
820 Views
Last post February 19, 2015, 07:05:49 pm
by mdavlee .
6 Replies
3222 Views
Last post September 02, 2012, 11:23:47 am
by ms460woodchuck
11 Replies
526 Views
Last post December 06, 2012, 07:08:32 am
by Al Smith
1 Replies
165 Views
Last post November 08, 2014, 06:33:26 am
by Moparmyway
29 Replies
599 Views
Last post September 28, 2015, 12:21:17 pm
by aclarke
49 Replies
1275 Views
Last post May 18, 2017, 07:24:13 am
by Cut4fun .
7 Replies
146 Views
Last post January 28, 2017, 09:39:04 pm
by Cut4fun .
2 Replies
262 Views
Last post February 16, 2018, 10:41:31 pm
by farmboy