Author Topic: 661 Oil Pump Max Output  (Read 137 times)

0 Members and 0 Guests are viewing this topic.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2070
  • Karma: 158
  • Location: MD
661 Oil Pump Max Output
« on: March 30, 2017, 09:12:51 pm »
 There is a pin on the oil pump that can driven in or removed so the oil pump control bolt will go another 1/4 turn. Thought I would post some pics of the said pin and location. I pulled my pin so I could always put it back in if need be. The pin boss is deep enough to drive it in flush with the pump. If you decide to drive it in you can use a punch to drive with out taking the pump off.



Sent from my iPad using Tapatalk
FEAR NO TREE. FEAR GOD.

Share on Facebook Share on Twitter

Like Like x 1 Useful Useful x 1 View List

Offline blueberrymuzik

  • 3 cube
  • *
  • Posts: 17
  • Karma: 3
  • Location: SW MO
Re: 661 Oil Pump Max Output
« Reply #1 on: April 01, 2017, 10:35:29 pm »
What did you use to pull it?
I have a "few" work saws

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2070
  • Karma: 158
  • Location: MD
Re: 661 Oil Pump Max Output
« Reply #2 on: April 02, 2017, 07:54:39 pm »
I just used regular pliers. Vise grips would probably work too just didn't have any close by.
FEAR NO TREE. FEAR GOD.

Offline blueberrymuzik

  • 3 cube
  • *
  • Posts: 17
  • Karma: 3
  • Location: SW MO
Re: 661 Oil Pump Max Output
« Reply #3 on: April 02, 2017, 10:12:11 pm »
Thanks! I'm going to pull that pin out of mine tomorrow.
I have a "few" work saws

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2070
  • Karma: 158
  • Location: MD
Re: 661 Oil Pump Max Output
« Reply #4 on: April 03, 2017, 09:59:08 pm »
I think you will be pleased with the extra oil.
FEAR NO TREE. FEAR GOD.