Author Topic: Stihl 500i (Read 4849 times)

Cut4fun · « **Reply #100 on:** October 12, 2020, 08:38:41 am »

Wish this was a 7910 7900 compared to 500i. Least be in the same cc class. But here is a video of these two.

https://youtu.be/rbFPafuiF8s

Old Iron Logging · « **Reply #101 on:** October 17, 2020, 08:07:04 pm »

Saw feels really light, nice balance. $1595 up here.

Cut4fun . · « **Reply #102 on:** October 18, 2020, 07:20:59 am »

$1186 PHO and here is with 20" up new prices I seen.

pho weight again

Cut4fun . · « **Reply #103 on:** October 18, 2020, 07:23:22 am »

462 500 still hoping for that 7900

https://youtu.be/KHmxBwEpIjA

Cut4fun · « **Reply #104 on:** October 19, 2020, 07:49:56 am »

Fuel injection but they forgot air injection.

https://youtu.be/qDtkaoabbB0

Cut4fun . · « **Reply #105 on:** October 25, 2020, 09:48:25 am »

Loggers dislikes and likes after 7 months of use out west. Lot of dislikes mentioned

Stock 500i 12.17 down & 11.63 up
Ported 500i 9.64 down & 8.93 up

https://youtu.be/U1DVoNxDj5M

Cut4fun . · « **Reply #106 on:** October 26, 2020, 10:18:03 am »

Read this by spike60 to EHP

ED, the 462 is a different animal for fuel use. And if i was a Stihl guy, I'd choose it over the 500. The 500 uses more fuel because it needs more fuel for cooling. They also eliminated their version of air injection so that all intake air at the flywheel is used for cooling; nothing to spare for helping with air filtration.

Cut4fun . · « **Reply #107 on:** October 27, 2020, 01:27:16 pm »

Mitch = 3-4 seconds faster than a stock 572, 6-7 seconds slower than my ported 572 and 17-18 seconds behind my ported 7310. Almost have two of either of those other for the price of one. Feels good though.

https://youtu.be/Zfnxle8NqvI

Cut4fun · « **Reply #108 on:** October 29, 2020, 10:16:24 am »

Mitch has another great thread going on chainsaw repair group facebook

Wont say which tech but alot of them on the CRG = INFO ADDED! After a conversation with a tech, I've been informed three sensors exist. One being a crank case barometric sensor and two temp sensors. This is how the ecu sorts out fueling map. If you made it through the 38 minutes, God bless you and thanks for watching!

https://youtu.be/uzRUU9UO1rw

Cut4fun . · « **Reply #109 on:** November 02, 2020, 08:31:00 am »

Mitch posted this pic of 500 after every rip cut he said.

Chainsaw Repair

News:

Author Topic: Stihl 500i (Read 4849 times)

Cut4fun

Re: Stihl 500i

Old Iron Logging

Re: Stihl 500i

Cut4fun .

Re: Stihl 500i

Cut4fun .

Re: Stihl 500i

Cut4fun

Re: Stihl 500i

Cut4fun .

Re: Stihl 500i

Cut4fun .

Re: Stihl 500i

Cut4fun .

Re: Stihl 500i

Cut4fun

Re: Stihl 500i

Cut4fun .

Re: Stihl 500i

Related Topics