Author Topic: Stihl fs45 problem  (Read 1125 times)

0 Members and 28 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl fs45 problem
« Reply #10 on: April 10, 2014, 09:45:53 pm »
I had the opinion three years ago that the white stuff was corrosion caused by water in the fuel. The fuel with the ethanol has the potential to hold a good bit of water before the ethanol and water precipitate out. This water laced ethanol component is reacting with the zinc diecasting the carb body is cast from.

I bought the weed whacker I was having trouble with from Craig's list and it was leaning against the Northwest side of the owners house trailer on the outside. So I assumed that water was a big part of the problem.

I have had not problem with it or the other Stihl weed whackers since then but I do not store them outside. 
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Ellinas

  • pruner
  • *
  • Posts: 4
  • Karma: 0

  • Total Badges: 7
    Badges: (View All)
    Level 2 Combination Topic Starter First Post Level 1 Search
Re: Stihl fs45 problem
« Reply #11 on: April 11, 2014, 07:09:15 am »
660magnum I do not know what you mean with the restriction thing
do you think it would be a good idea to upload the parts diagram of the carb
in order you to have a clear picture of what is going on?


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl fs45 problem
« Reply #12 on: April 11, 2014, 07:22:43 am »
660magnum I do not know what you mean with the restriction thing
do you think it would be a good idea to upload the parts diagram of the carb
in order you to have a clear picture of what is going on?



Restriction:
Part of the fuel circuit in your carb is plugged?

If you know your carburetor number, you can look up all about it here: http://www.zamacarb.com/prod_lookup.cfm
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Ellinas

  • pruner
  • *
  • Posts: 4
  • Karma: 0

  • Total Badges: 7
    Badges: (View All)
    Level 2 Combination Topic Starter First Post Level 1 Search
Re: Stihl fs45 problem
« Reply #13 on: April 11, 2014, 08:13:25 am »
Thanks a lot! i found my carb and as i saw its a Discontinued model
so now i am wondering why the Stihl dealer does not told me that...

Well because there are lot of stuff in the pictrures and i am not an expert
i have one more question. The parts manual that i found on the net includes
five or six carbs for the FS-45, is it possible to fit all of them to my machine or only
the one of them fits? because i saw that some models are not Discontinued. And
is there any way to be sure that the dealers price match the real price of the carb?
because i suspect that the dealer try to sell in a higher price.


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Stihl fs45 problem
« Reply #14 on: April 11, 2014, 08:24:48 am »
Thanks a lot! i found my carb and as i saw its a Discontinued model
so now i am wondering why the Stihl dealer does not told me that...

Well because there are lot of stuff in the pictrures and i am not an expert
i have one more question. The parts manual that i found on the net includes
five or six carbs for the FS-45, is it possible to fit all of them to my machine or only
the one of them fits? because i saw that some models are not Discontinued. And
is there any way to be sure that the dealers price match the real price of the carb?
because i suspect that the dealer try to sell in a higher price.



I had the same problem. My carb had been discontinued also. Then there were so many other carburetors on the list?

I picked another carb that was not obsolete. I had to order it as the dealer did not have any of the optional carburetors. The dealer ordered two of them when he ordered mine.

I installed the carburetor and the engine started right up as if brand new and never had any trouble since then. I just ran this trimmer yesterday.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
14 Replies
3780 Views
Last post June 28, 2012, 10:16:03 pm
by 660magnum
4 Replies
515 Views
Last post February 18, 2012, 11:06:09 pm
by Cut4fun .
0 Replies
627 Views
Last post April 13, 2012, 04:19:50 pm
by Cut4fun .
3 Replies
474 Views
Last post October 30, 2013, 06:50:20 am
by redunshee
8 Replies
1298 Views
Last post June 10, 2016, 10:15:36 pm
by mdavlee .
3 Replies
465 Views
Last post April 26, 2017, 07:00:06 am
by Jacks54
2 Replies
1742 Views
Last post May 22, 2017, 02:50:56 pm
by Cut4fun .
5 Replies
1540 Views
Last post August 10, 2017, 11:40:53 am
by Spike47
1 Replies
370 Views
Last post May 13, 2018, 04:53:20 pm
by Cut4fun .
2 Replies
417 Views
Last post September 14, 2022, 09:29:38 pm
by 3000 FPS