« previous next »
Pages: [1] 2 3 4 5 6   Go Down

Author Topic: Stihl info  (Read 21351 times)

0 Members and 6 Guests are viewing this topic.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Stihl info
« on: May 13, 2011, 09:55:39 pm »

1106 090
1107 07
1108 08 S
1109 090 G
1110 041
1111 051, 075, 076
1112 041 G
1113 030, 031, 032
1114 020
1115 045, 056
1116 015
1117 042, 048
1118 028
1119 038
1120 009, 010, 011, 012
1121 024, 026, MS 260
1122 064, 066, MS 650, MS 660
1123 021, 023, 025, MS 210, MS 250
1124 084, 088, MS 880
1125 034, 036, MS 360
1127 029, 039, MS 290, MS 310, MS 390
1128 044, 046, MS 440, MS 460
1129 020 T, MS 200 T
1130 017, 018, MS 170, MS 180
1132 019 T, MS 191T
1133 MS 270, MS 280
1135 MS 361
1137 MS 192
1138 MS 441
1139 MS 171, MS 181, MS 211
1140 MS 311, MS 362, MS 391
1141 MS 261, MS 271, MS 291
Logged
Ron

Share on Facebook Share on Twitter

Like Like x 1 View List

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Re: Stihl info
« Reply #1 on: May 13, 2011, 10:23:03 pm »
Didnt know some of the new ones.  8)

Here is some info I posted elsewhere here too.

440/460, 044/046 Dual port cover  1128 140 0801

    660/066 DP cover  1122 140 0800

    Large felling dawgs
    440/460 inner 1122 664 0506
    440 outer 1122 664 0501
    460 outer 1128 664 0501
    660 inner 1122 664 0508
    660 outer 1122 664 0503
   
   Ceramic chain catcher fits all 3 1122 650 7700
   
   PNW clutch cover  fits all 3 1122 648 0403
   
   361 PNW cover 1138 648 0400
   
  TS400 screen/clip for a muffler mod with a 9/16 pipe.
    Screen 4223 141 9000
    Clip  4223 141 6600
   
044 serial X29583701 or below = 10mm wrist pin

Carb jets  - not all are available in all countries
.46 = 1121 121 5601
.52 = 1121 121 5602
.56 = 1120 121 5600
.61 = 1123 121 5601
.62 = 1122 121 5603
.64 = 1122 121 5604
.66 = 1128 121 5605
.68 = 1128 121 5603
.70 = 1128 121 5602
.72 = 1122 121 5602
.74 = 1122 121 5607
.76 = 1128 121 5604
.88 = 1124 121 5609
1.04 = 1124 121 5604

Carburetors with fully adjustable fuel mixture screws:
044/046/MS440/MS460 = 1128 120 0624 with .70 jet
064/066/MS650/MS660 = 1122 120 0621 with .64 jet

Dual port muffler covers:
044/046/MS440/MS460 = 1128 140 0801
064/066/MS650/MS660 = 1122 140 0800

1129-120-0650 Is the Stihl part number for the zama without the accelerator pump   11291200650  200T 020T

Scrench holder  11288918600   1128 891 8600
Logged

Offline w8ye

  • 5 cube
  • ***
  • Posts: 117
  • Karma: 5
Re: Stihl info
« Reply #2 on: October 21, 2011, 01:16:06 pm »
High Output Pump for 460, 660, etc. 1122 640 3201   $81.46 (prices from Norwalk)

These are the two parts that are different in the H O pump from the standard pump

1122 647 0602  Pump Piston with 1.15 mm stroke instead of .9 mm stroke  $37.54

1128 647 4802  Control Bolt  (The companion piece to the HO piston) $10.50

When removing and modifying the pump you should also replace these parts . . . .

9646 945 0160  O rings 4 X 2   for control bolt (You need two)

1122 649 5000  Sealing Ring B4 X 2   Seals pump body to oil tank (You need one)
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23511
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl info
« Reply #3 on: February 04, 2013, 09:52:29 am »
I cant remember the stihl 460 rescue handle D ring starter handle part number. Anyone so we can help the guy with the dolmar.

Found it 1128-195-3401 for the stihl 460  rescue handles. $4 to $7 depending on dealer.


 
Logged

Offline davbell22602

  • Piped Saw
  • *****
  • Posts: 391
  • Karma: 3
  • Location: Winchester, Va
Re: Stihl info
« Reply #4 on: February 04, 2013, 10:36:16 am »
I take it the first 4 digits of stihl part number represents the model of the saw? If so this nice info to know.
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl info
« Reply #5 on: February 04, 2013, 10:45:02 am »
Correct
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline davbell22602

  • Piped Saw
  • *****
  • Posts: 391
  • Karma: 3
  • Location: Winchester, Va
Re: Stihl info
« Reply #6 on: February 04, 2013, 10:54:29 am »
Whats the first 4 for the ms341? Would it be in same group as the 034, 036 and ms360?
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl info
« Reply #7 on: February 04, 2013, 11:24:54 am »
The 360 is 1125.

Almost all the parts of the 340 are the same as the 360.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23511
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl info
« Reply #8 on: February 04, 2013, 11:42:21 am »
I'm guessing here but I would bet a 341 would be the same as 361 1135 being 341 same saw just a detuned version.
Logged

Offline JohnG28

  • Piped Saw
  • *****
  • Posts: 315
  • Karma: 27
Re: Stihl info
« Reply #9 on: February 04, 2013, 11:54:15 pm »
I believe you're right C4F, my 361 manual has the 341 model in it as well. I also think they're both on the IPL.
Logged
Pages: [1] 2 3 4 5 6   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
49 Replies
16437 Views 		Last post February 13, 2016, 06:19:32 pm
by farmboy
0 Replies
358 Views 		Last post May 10, 2011, 06:36:34 pm
by Cut4fun .
4 Replies
373 Views 		Last post May 22, 2013, 02:37:04 pm
by Le Maisonniau
2 Replies
686 Views 		Last post August 22, 2015, 10:26:29 am
by 1manband
0 Replies
338 Views 		Last post March 17, 2016, 12:54:13 pm
by Cut4fun .
1 Replies
726 Views 		Last post January 03, 2017, 02:38:07 pm
by Cut4fun .
4 Replies
576 Views 		Last post August 13, 2017, 01:48:48 pm
by Cut4fun .
10 Replies
5163 Views 		Last post May 02, 2019, 01:09:56 pm
by Cut4fun .
1 Replies
591 Views 		Last post December 03, 2017, 08:44:10 am
by jmester
0 Replies
281 Views 		Last post March 27, 2021, 09:01:27 am
by Cut4fun