Author Topic: Stihl info  (Read 11084 times)

0 Members and 17 Guests are viewing this topic.

Offline splitter2784

  • 3 cube
  • *
  • Posts: 17
  • Karma: 1
Re: Stihl info
« Reply #20 on: February 03, 2015, 09:24:30 pm »
Where does the ms290 fit in on this chart?

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl info
« Reply #21 on: February 04, 2015, 01:14:46 am »
1127 .......................029, 039 ............................... 1992-2000
............................... 2000-2012
............................... 2000-2009

The 029 became the MS 290, it is a model 1127
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4122
  • Karma: 171
  • OHIO REDNECK
Re: Stihl info
« Reply #22 on: February 20, 2015, 04:29:48 pm »
Came across this. Might help someone.

5910 007 2205 AS crankshaft tool (clutch side removal/installation)
5910 007 2200 ZS crankshaft tool (ignition side removal/installation)
0000 890 1711 Testing Pressure/Vacuum kit (has a couple small pieces missing, like the two small tubes)
5910 890 4400 Oil Seal Puller with 3 sets of jaws
1111 890 6400 Ignition air gap gauge
1110 890 4500 small flywheel puller for most saws up to 046 and old style 066
1106 890 4501 large flywheel puller for the larger saws like new 066, 084 088 076 etc
0000 893 2600 piston ring clamp
0000 893 5903 piston stop
1108 893 4800 wood install block
Torx screw T handle wrench
Exhaust block/gasket for 026-046 saws
old style clutch wrench

Oil Seal Installation Tools
1115 893 4600 for 046, 045 056 and more
1118 893 2401 for 028, 024 , 026, 034, 036, 044
1124 893 2400 for 084 and 088
1127 893 2400 for 038, 084, 088, 064, 066, 029, 039 (used to be 1119 893 2401 but was renumbered)
1121 893 2400 for 024, 026, 034, 036
1128 890 3900 for 044, 064 066
Also 4 sleeves that fit against crankshaft under these on the clutch side

Bearing removal/install tools
1124 893 7200 for 084 088
1118 893 7200 for 028 024 026 034 036 044 046
1122 893 7200 for 064 066
1120 893 7200 for 044 046 009 010 011 012
1119 893 7200 for 038 066 064
REDNECK Saw Repair

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Stihl info
« Reply #23 on: February 20, 2015, 05:22:16 pm »
Good deal. Thk

Offline 1955cj5

  • pruner
  • *
  • Posts: 2
  • Karma: 1
Re: Stihl info
« Reply #24 on: June 15, 2015, 04:01:05 pm »
I cant remember the stihl 460 rescue handle D ring starter handle part number. Anyone so we can help the guy with the dolmar.

Found it 1128-195-3401 for the stihl 460  rescue handles. $4 to $7 depending on dealer.


 


Ok I gots to get me one of those pull handles for my 034, I should be able to walk into my local dealer with the part number right? No reason I couldn't use that on any saw I wanted???

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl info
« Reply #25 on: June 15, 2015, 04:16:01 pm »
I cant remember the stihl 460 rescue handle D ring starter handle part number. Anyone so we can help the guy with the dolmar.

Found it 1128-195-3401 for the stihl 460  rescue handles. $4 to $7 depending on dealer.


 


Ok I gots to get me one of those pull handles for my 034, I should be able to walk into my local dealer with the part number right? No reason I couldn't use that on any saw I wanted???

Yep should be able to at any dealer worth their salt.

By the way welcome to the site and enjoy. ;)
REDNECK Saw Repair Getter Done

Offline 1955cj5

  • pruner
  • *
  • Posts: 2
  • Karma: 1
Re: Stihl info
« Reply #26 on: June 15, 2015, 04:53:29 pm »
Thanks man, glad to be here lots of knowledge.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl info
« Reply #27 on: June 15, 2015, 05:38:18 pm »
Thanks man, glad to be here lots of knowledge.

Any saw you need. I put one on my dads poulan 3300 that was starting to hurt his hands with the 2 finger T handle they used.

I even added a rubber hose to extend them for cold start racing.

Stihl 460 rescue handle big d ring grip  11281953401


REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2066
  • Karma: 158
  • Location: MD
Re: Stihl info
« Reply #28 on: June 15, 2015, 08:47:39 pm »

Bearing removal/install tools
1124 893 7200 for 084 088
1118 893 7200 for 028 024 026 034 036 044 046
1122 893 7200 for 064 066
1120 893 7200 for 044 046 009 010 011 012
1119 893 7200 for 038 066 064


These will also work on most of the pro husky saws as well. Used the 1119 893 7200 to put the crank bearings in my 394 case. Not as press mandrel like they are made but just as a holder for the bearing so I don't burn my fingers on the case. They are also fairly inexpensive.
FEAR NO TREE. FEAR GOD.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl info
« Reply #29 on: December 24, 2016, 10:01:19 am »
Just copy and pasting info to save.


The year of the Stihl saws

In doubt you can ask with Stihl with the serial number and try to give an answer.

Sometimes you can read the sticker on the brake lever with "newer" saws.

Then, on the motorcycle and on plastic components at Stihl, so-called date clocks can be seen. In which year were they introduced? Outside the numbers on the watch from 1 to 12 describe the month of manufacture. The year of production is coded by letter:
Year of construction    Character letter    comment
1984    J    It followed
1985    K    And then continually up
...       
1999    Z    From
2000    A    Then start again from the beginning. So
2001    B    etc
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
49 Replies
12432 Views
Last post February 13, 2016, 06:19:32 pm
by farmboy
6 Replies
321 Views
Last post November 07, 2014, 08:44:37 pm
by farmboy
2 Replies
435 Views
Last post August 22, 2015, 10:26:29 am
by 1manband
0 Replies
412 Views
Last post December 29, 2015, 09:42:33 am
by Cut4fun .
0 Replies
202 Views
Last post March 17, 2016, 12:54:13 pm
by Cut4fun .
1 Replies
386 Views
Last post January 03, 2017, 02:38:07 pm
by Cut4fun .
4 Replies
310 Views
Last post August 13, 2017, 01:48:48 pm
by Cut4fun .
0 Replies
182 Views
Last post September 17, 2017, 10:30:11 am
by Cut4fun .
10 Replies
1729 Views
Last post May 02, 2019, 01:09:56 pm
by Cut4fun .
1 Replies
310 Views
Last post December 03, 2017, 08:44:10 am
by jmester