Hi all, new member here, hoping to get some help with my ms 310
Never had a any issues till today. I was cutting for about 15 minuts when the saw stopped running well above 1/2 throttle. I cleaned the plug, air filter, checked the carb adjustment and put in fresh fuel to no avail. The saw starts and idles fine and runs good till about 1/2 throttle and then acts like it is starved for fuel. I then ran it with out the air filter and noticed that when I give full throttle there is fuel spitting back out the carb. That can't be good. Do these saws have reed valves? Ideas?
Thanks
Matt