« previous next »
Pages: [1]   Go Down

Author Topic: Stihl MS180c no high rpm's  (Read 362 times)

0 Members and 0 Guests are viewing this topic.

Offline fastback4

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Stihl MS180c no high rpm's
« on: August 21, 2013, 06:37:13 pm »
I used it in May and now it has no high rpm's but idles fine. This model has no high/low adjust screws. The chain lock is not engaged. If I throttle it up slowly it tries to get high rpm's but flutters out back to idle. I put on new filter and fuel lines I had for it and checked the needle and seat assembly and screen in the carb and brake cleaned everything well. New fuel, new plug, same results...no high rpm's...advise here please....Tom
Logged

Share on Facebook Share on Twitter

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23363
  • Karma: 659
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl MS180c no high rpm's
« Reply #1 on: August 21, 2013, 06:53:30 pm »
I'd be looking into complete carb rebuild or another carb.
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl MS180c no high rpm's
« Reply #2 on: August 21, 2013, 07:14:14 pm »
Get a new carb $35
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline fastback4

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Re: Stihl MS180c no high rpm's
« Reply #3 on: August 21, 2013, 07:18:33 pm »
I'm thinking new carb also......I've seen some with high low adjust screws. will these work on my saw
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl MS180c no high rpm's
« Reply #4 on: August 21, 2013, 07:41:03 pm »
The earlier 018 had a low speed screw in the carb
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Fish

  • Piped Saw
  • *****
  • Posts: 309
  • Karma: 39
Re: Stihl MS180c no high rpm's
« Reply #5 on: August 22, 2013, 12:31:26 pm »
Take off your muffler screen and clean it, and your air filter too.
Logged

Offline Fish

  • Piped Saw
  • *****
  • Posts: 309
  • Karma: 39
Re: Stihl MS180c no high rpm's
« Reply #6 on: August 22, 2013, 12:32:46 pm »
What part of Ky are you in?
Logged

Offline fastback4

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Re: Stihl MS180c no high rpm's
« Reply #7 on: August 22, 2013, 01:53:32 pm »
northern Ky. I bought a new stihl carb at Cottinghams today.....$25.00 and we are cutting wood again......
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23363
  • Karma: 659
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl MS180c no high rpm's
« Reply #8 on: August 22, 2013, 01:56:09 pm »
Quote from: fastback4 on August 22, 2013, 01:53:32 pm
northern Ky. I bought a new stihl carb at Cottinghams today.....$25.00 and we are cutting wood again......

So carb was the fix? 
Logged

Offline fastback4

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Re: Stihl MS180c no high rpm's
« Reply #9 on: August 22, 2013, 02:04:08 pm »
Oh yea, new carb was the fix....runs like a new saw again....thanks for reading the posts and helping discuss a solution....
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1417 Views 		Last post January 10, 2012, 01:40:57 pm
by Cut4fun
3 Replies
527 Views 		Last post July 03, 2013, 03:38:13 pm
by Fish
stihl ms180c

Started by pete Stihl

9 Replies
421 Views 		Last post September 25, 2013, 06:48:48 pm
by 660magnum
21 Replies
657 Views 		Last post October 13, 2013, 08:52:20 am
by KilliansRedLeo
MS180C doesn't oil

Started by Randy « 1 2 » Stihl

17 Replies
710 Views 		Last post April 05, 2014, 10:47:52 pm
by 660magnum
7 Replies
541 Views 		Last post December 01, 2014, 11:04:56 pm
by 660magnum
2 Replies
330 Views 		Last post November 24, 2014, 08:54:41 am
by sharkey
6 Replies
417 Views 		Last post June 22, 2017, 09:43:36 am
by 660magnum
2 Replies
539 Views 		Last post January 07, 2018, 08:12:37 pm
by jmester
3 Replies
266 Views 		Last post December 10, 2021, 09:05:47 am
by Cut4fun