« previous next »
Pages: [1] 2   Go Down

Author Topic: Stihl MS250 C  (Read 1130 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23350
  • Karma: 659
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Stihl MS250 C
« on: October 12, 2012, 01:39:16 pm »
Just had a  stihl 250 dropped off and seen a  C on the recoil. Just wondering what the C means on the stihls?  I dont have time to check saw over right this second to figure it out myself, so I thought I would ask.

Guessing easy start?
Logged

Share on Facebook Share on Twitter

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl MS250 C
« Reply #1 on: October 12, 2012, 01:51:21 pm »
It has a compression release and a tool less chain adjuster. Sometimes there is the elastic pull handle?
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23350
  • Karma: 659
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl MS250 C
« Reply #2 on: October 12, 2012, 01:57:21 pm »
Quote from: 660magnum on October 12, 2012, 01:51:21 pm
It has a compression release and a tool less chain adjuster. Sometimes there is the elastic pull handle?

Like I said just glanced at it. Dont know if it does have a elastic start handle etc.   I've just never seen a C before so wondered.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23350
  • Karma: 659
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl MS250 C
« Reply #3 on: October 12, 2012, 02:49:47 pm »
Quote from: Cut4fun2 on October 12, 2012, 01:57:21 pm
Quote from: 660magnum on October 12, 2012, 01:51:21 pm
It has a compression release and a tool less chain adjuster. Sometimes there is the elastic pull handle?

Like I said just glanced at it. Dont know if it does have a elastic start handle etc.   I've just never seen a C before so wondered.

660 I need to correct some of your info.  Has tool less cover but No compression release.  No elastic handle.

Has primer bulb and easy start recoil.  Hard for me to get used to that but works good.
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl MS250 C
« Reply #4 on: October 12, 2012, 03:19:18 pm »
What's different about the "Easy Start Recoil"?
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23350
  • Karma: 659
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl MS250 C
« Reply #5 on: October 12, 2012, 03:24:39 pm »
Sticks out further. It pulls over very easily out, it stops then it rotates to start it. Like I was winding something up. I will be here to about 5pm if you want to check it out.

Has H L LA carb which is good but H was against stop and turning 14.8K  :o :o  Got out the dremel and fixed that, now turning 12.5K.

Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23350
  • Karma: 659
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl MS250 C
« Reply #6 on: October 12, 2012, 05:26:02 pm »
I can see the easy start being useful for some people. I think a think a 3 year old could pull them since they are so easy IMO.

What did you think 660mag?
Logged

Offline H 2 H

  • 5 cube
  • ***
  • Posts: 100
  • Karma: 11
  • Location: Were the Pacific Northwest Soft Woods Grow
Re: Stihl MS250 C
« Reply #7 on: October 12, 2012, 05:32:44 pm »
I haven't worked on a 250 C but I've rebuilt several 250 this year that were straight gassed

But the two 250 I owned are set to 13,000



Seems this home owner saw get straight gassed alot by there owners

There easy to rebuild and work on and parts are cheap for that series

I've seen two different carbs on them (depends on the year of the saw) on the Zama carb all you have to do is pull the roll pin out and that fixes the limiter
Logged
"People ask me where all my money went, I tell them half of it I spent on gambling, fast women and liquor, the other half I wasted!" W.C.

"..... nothing more funnier than watching some ole coot make a fool out of himself, especially sideways”

"You can't argue with someone that doesn't have any real life experience on the subject."

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl MS250 C
« Reply #8 on: October 12, 2012, 06:19:32 pm »
The "Easy Start" on the Stihl 250C that cut4fun had at his house this afternoon was unbelievably easy to pull. Not being accustomed to it and owning a regular 025, I pulled the cord all the way out and let the handle go back into the starter. Then the engine turned over and started as the Stihl 250C was stihl warm from being run earlier. I shut it off and restarted it several times this way.

There is no compression release or Elastostart on this one for it is not needed.

It would take a mighty stout woman to start my regular 025 for it has very strong compression and no compression release. If it is cold, I have to start it on the ground.

I have a Dolmar 5105 that is supposed to be "Easy Start" and it has a wrap spring between the starter pulley and the crankshaft but it doesn't work as easy as the one on the /Stihl 250 that I used today.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181
Re: Stihl MS250 C
« Reply #9 on: October 12, 2012, 07:28:28 pm »
I'll bet that thing has an inertia starter on it .Remember way back they made lawn mowers you wind up ,clip the handle over and a wound up spring turned the engine over .

They worked great until the starter fell apart .Then about the only way you could get it started is with a drill motor and a deep socket on the nut .
Logged
Pages: [1] 2   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
12 Replies
967 Views 		Last post January 26, 2012, 09:09:40 am
by ECpirates96
0 Replies
364 Views 		Last post December 31, 2012, 02:18:19 pm
by Cut4fun .
Stihl MS250

Started by Cut4fun . « 1 2 3 4 » Stihl

36 Replies
1398 Views 		Last post August 13, 2013, 04:38:06 pm
by Cut4fun .
ms250 questions

Started by countryhog « 1 2 » Stihl

10 Replies
682 Views 		Last post January 22, 2014, 01:48:58 pm
by H 2 H
17 Replies
884 Views 		Last post May 12, 2014, 12:40:25 am
by sharkey
5 Replies
6291 Views 		Last post July 23, 2014, 10:58:05 pm
by 660magnum
2 Replies
1654 Views 		Last post August 27, 2014, 07:50:56 am
by farmboy
3 Replies
702 Views 		Last post October 28, 2014, 11:40:10 pm
by aclarke
8 Replies
802 Views 		Last post June 12, 2015, 07:27:57 pm
by 660magnum
2 Replies
1219 Views 		Last post May 22, 2017, 02:50:56 pm
by Cut4fun .