Author Topic: Stihl MS250 (Read 881 times)

ohio andy · « **Reply #30 on:** August 13, 2013, 08:38:22 am »

Then it has to be the rakers. When i went through it after purchase, the AV mounts were in good shape. I will give it an aggressive filing and leave the depth gauges alone and see if it is any more enjoyable to run.

Right now i am in a four saw plan with all four being too close together.

MS 440 - 70cc
034 (not done yet) - 61 cc
029 super - 56 cc
MS 250 - 49 cc

No really gaps. I plan to keep the 440 and 034. I hate to sell the 029super. it has been a great saw for me and it is a really clean saw, but once the 034 is done and i get a pro 50 cc, i know it will never get used. I think for me, a three saw plan will be good. 50, 60 & 70, until a steal of a 660 comes along or a 61 or 441CM or...

Cut4fun · « **Reply #31 on:** August 13, 2013, 08:42:46 am »

Does anyone need me to show how I use tygon fuel line in place of stihl fuel line on stihls? Also allows you to use husky, poulan , echo etc type fuel filters, instead of stihl only filters?

I could do this on this 250 till I find out if new owner wants oem line or not.

Cut4fun . · « **Reply #32 on:** August 13, 2013, 02:23:16 pm »

Rednecked the fuel line on the 250 so it would never have to use stihl fuel line and filters again. http://chainsawrepair.createaforum.com/stihl/stihl-ms250-quick-fuel-line-fix/msg22370/#msg22370

Surprised to see the L and H carb on it too.

RM 325 chain seems slow.

Still has the bar code on front of the crankcase.

ohio andy · « **Reply #33 on:** August 13, 2013, 02:32:16 pm »

Is that the ZAMA Carb? Mine has a fully adjustable Zama on it.

Cut4fun . · « **Reply #34 on:** August 13, 2013, 02:34:45 pm »

Yep fully adjustable zama on the 250. The one on 025 you couldnt.

660magnum · « **Reply #35 on:** August 13, 2013, 02:51:43 pm »

I have a 025 that came with a single needle carb. It actually ran fine on high speed but I didn't like the idea of not being able to adjust the High Speed.

I bought a new twin needle carb for it from the Stihl dealer it was $22 + tax. Ran perfect out of the box.

Cut4fun . · « **Reply #36 on:** August 13, 2013, 04:38:06 pm »

Saw tested how fine and smooth as can be in the cuts.

Hour or so later someone shows up buys and takes home. Didn't even get to own for 24hrs.

Chainsaw Repair

News:

Author Topic: Stihl MS250 (Read 881 times)

ohio andy

Re: Stihl MS250

Cut4fun

Re: Stihl MS250

Cut4fun .

Re: Stihl MS250

ohio andy

Re: Stihl MS250

Cut4fun .

Re: Stihl MS250

660magnum

Re: Stihl MS250

Cut4fun .

Re: Stihl MS250

Related Topics