Author Topic: stihl flippy cap replacements  (Read 3026 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: stihl flippy cap replacements
« Reply #40 on: January 26, 2016, 07:46:57 pm »
    Howdy,
I should have a supply about March - April. They'll sell for about $8.00 each.
Regards
Gregg

small and bigger ones offered?
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: stihl flippy cap replacements
« Reply #41 on: February 11, 2016, 05:31:07 pm »
Good feedback so far as the test 440 just came back in.  Only thing I noticed before it was sent out. The plastic on the tank retainer part  Y inside tank breaks easy. 

Wonder if they could make them to use the ball like oem does instead.

Also I have request for the small oiler cap style like on the stihl MS211. Are those going to be made in replacement too?
REDNECK Saw Repair Getter Done

Offline DefinitiveDave

  • 5 cube
  • ***
  • Posts: 89
  • Karma: 24
Re: stihl flippy cap replacements
« Reply #42 on: February 11, 2016, 08:37:32 pm »
Gregg let me know the smaller ones are also being developed.
Dave
seeking new in box 046, standard or arctic model



Ebay Store: http://stores.ebay.com/Chainsaw-Conservation-Components

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4040
  • Karma: 159
  • OHIO REDNECK
Re: stihl flippy cap replacements
« Reply #43 on: February 23, 2016, 01:03:12 pm »
Good feedback so far as the test 440 just came back in.  Only thing I noticed before it was sent out. The plastic on the tank retainer part  Y inside tank breaks easy. 

Wonder if they could make them to use the ball like oem does instead.



I modded this one while it was here. It is now like OEM where I could use the slot in tank to hang from.
REDNECK Saw Repair

Offline bustedknuckles

  • 4 cube
  • **
  • Posts: 70
  • Karma: 11
Re: stihl flippy cap replacements
« Reply #44 on: February 24, 2016, 10:06:24 pm »
The one I've been testing has been installed to test leakage but I haven't used it in operational testing yet.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: stihl flippy cap replacements
« Reply #45 on: April 28, 2016, 06:48:48 pm »
     Howdy,
   As soon as I have pricing, and availability I'll get back on here and post it.
Regards
Gregg

Quote from: Grande Dog link=topic==

Howdy,
Well, the fuel caps are in. The oil caps are still in process. Our developer will be getting them on the website this weekend. The caps will be $7.50 each if you drop them in the cart on our website. I know there'll be a lot of people who just want to order caps. So, the best way I can work this if you're ordering caps only is for quantities of 1 or 2 they'll be $10.00 each with shipping included. Any order for 3 or more will be $7.50 each with shipping included. If anybody wants to go by Paypal, contact me with a USPS ship to address, and a e-mail address. I'll send you an invoice you can pay.
Regards
Gregg


Above is the update on fuel and the smaller oil caps.   Link to buy http://leftcoastsupplies.com/product/fuel-cap/
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: stihl flippy cap replacements
« Reply #46 on: October 05, 2016, 04:57:54 pm »
Any update?  I got a 211 in and the lady says she wants one of those small oil caps like pronto.

@Grande Dog

REDNECK Saw Repair Getter Done

Offline 94BULLITT

  • 3 cube
  • *
  • Posts: 24
  • Karma: 4
  • Location: Frederick County, VA
Re: stihl flippy cap replacements
« Reply #47 on: November 14, 2018, 02:34:26 pm »
How are these left coast flippy cap replacements holding up? I had a flippy cap break on a low hour saw, so now I am not a fan of them. It is pretty aggravating to have a good running saw down because of a gas cap.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: stihl flippy cap replacements
« Reply #48 on: November 14, 2018, 03:14:10 pm »
I started just ordering the ones Dave at CCC on ebay sold myself. The locals liked the ease of those best.  Plust they were only like 12 a pair shipped.
REDNECK Saw Repair Getter Done

Offline 94BULLITT

  • 3 cube
  • *
  • Posts: 24
  • Karma: 4
  • Location: Frederick County, VA
Re: stihl flippy cap replacements
« Reply #49 on: November 22, 2018, 11:48:54 pm »
Do those style stay tight Cut?

I was going to order the ones left coast has, but the shipping is something ridiculous. I know if you call, they can ship small orders USPS at a lower cost. I called them and immediately music played on the phone. Then it said trying to connect and then it sent me to a voicemail box. I thought this sounded strange, so I hung up and checked to make sure I called the right number. I had called the right number so I called back and left a message. That was Tuesday and I never heard anything back. Is Left Coast still in business?

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1299 Views
Last post March 21, 2011, 08:19:57 pm
by Cut4fun
Stihl 038

Started by Cut4fun Stihl

9 Replies
1768 Views
Last post September 30, 2019, 10:00:23 am
by Al Smith
Stihl 024

Started by Cut4fun Stihl

5 Replies
4147 Views
Last post July 13, 2018, 06:14:59 am
by Al Smith
6 Replies
716 Views
Last post June 27, 2017, 08:30:17 pm
by Cut4fun .
28 Replies
951 Views
Last post November 08, 2015, 01:28:42 am
by wild262
0 Replies
154 Views
Last post February 29, 2016, 10:02:55 am
by Cut4fun
17 Replies
911 Views
Last post November 14, 2018, 06:52:21 pm
by Cut4fun .
0 Replies
105 Views
Last post March 15, 2016, 02:11:05 pm
by Cut4fun .
0 Replies
321 Views
Last post June 21, 2016, 04:24:11 pm
by Cut4fun .
1 Replies
55 Views
Last post March 15, 2020, 11:20:55 pm
by ssidwell