Author Topic: where to buy ms200t crankshaft bearings and seals (Read 760 times)

ncarr275 · « **Reply #10 on:** January 09, 2013, 04:33:36 pm »

Well guys I'm glad I found and registerd to this site. You guys are allright, thanks for the help. And Al I like that mis-matched 020/200 you have I was wondering if they could share fuel tanks/cranks etc. I have a 192t I dropped out of a tree and broke the chain brake gaurd on and installed a ms200's I was pretty happy with stihl that this was possible. The 200 gaurd is way beefer too, looks good. I now the 192's are cheesey but they are really light.

Al Smith · « **Reply #11 on:** January 09, 2013, 06:38:30 pm »

I've got a set of crankcase halves and two cranks .However in addition to my two 200T's I also maintain around 7 or 8 for two different tree services so I need to keep them .I'm not certain what might interchange if anything from a 192 to a 200T .

Fact being I've passed up several 192s' that sustained damage from a fall .I just didn't want to fool with them more due to fact I've got the pair of 200's already than anything .

I can't really say one way or the other because I've never operated a 192 .The tree service guys locally don't care for them though which is what I base that on.

ncarr275 · « **Reply #12 on:** January 10, 2013, 10:33:44 am »

the 192's don't have close to the power of a 200 but for small branches there all you need and the light weight is great in the tree. It's just like any other buissness now a days lower the production cost to raise the profit margine. Can't blame it on stihl sure would be nice to see some good quailty saws built agian with the technology these days they could produce some real bad to the bone saws.

Al Smith · « **Reply #13 on:** January 14, 2013, 02:48:24 pm »

Say I did a little research and had to get my jewlers loupe out to read the part numbers .Those bearings for the 200T are made by INA of Germany .The part number is F211095.2 .I couldn't find anything on line but a person might do okay at a bearing supply house unless it's a Stihl OEM part number only and specifically controlled by Stihl which some are .In other words some specifically made bearings as well as seals the Stihl corperation has worldwide distrubution rights .Sucks but that's the way it is .

ncarr275 · « **Reply #14 on:** January 14, 2013, 03:48:28 pm »

Thanks for the part # Al. I allready bought and received a set from a guy selling brand new OE Stihl bearings on EBAY. 20$ each. I'm not even sure I need a set yet I just like to have my parts on hand. I do have a 200 I stopped using that needs a top end for sure.

Cut4fun . · « **Reply #15 on:** September 24, 2013, 07:23:56 pm »

Stihl 200T seal bump

Chainsaw Repair

News:

Author Topic: where to buy ms200t crankshaft bearings and seals (Read 760 times)

ncarr275

Re: where to buy ms200t crankshaft bearings and seals

Al Smith

Re: where to buy ms200t crankshaft bearings and seals

ncarr275

Re: where to buy ms200t crankshaft bearings and seals

Al Smith

Re: where to buy ms200t crankshaft bearings and seals

ncarr275

Re: where to buy ms200t crankshaft bearings and seals

Cut4fun .

Re: where to buy ms200t crankshaft bearings and seals

Related Topics