Author Topic: Stihl 084  (Read 7446 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20431
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 084 AV dies at idle
« Reply #50 on: November 11, 2011, 09:07:15 pm »
Did you ever find a known good carb to try on it?  084 088 880 will work.
REDNECK Saw Repair Getter Done

Offline mike84c

  • 3 cube
  • *
  • Posts: 23
  • Karma: 1
Re: Stihl 084 AV dies at idle
« Reply #51 on: November 12, 2011, 07:56:06 am »
no, unfortunately,  I dont have one, or have a friend with one, anyone got one for sale?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20431
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 084 AV dies at idle
« Reply #52 on: November 12, 2011, 02:32:06 pm »
I sent you info on who bought my last Ht-1 I had rebuilt and tested and know it was just a extra carb at the time for him. Also check with bloodontheice he works in a stihl dealership in NY.
REDNECK Saw Repair Getter Done

Offline mike84c

  • 3 cube
  • *
  • Posts: 23
  • Karma: 1
Re: Stihl 084 AV dies at idle
« Reply #53 on: December 19, 2011, 07:21:49 pm »
Finally got a replacement carb from someone on ebay (2 weeks + shipping from Canada), and lo and behold, it works!  haven't cut with it, as its evening and dark outside, but is sounds good, and finally idles properly.  Thanks for all of your help on this forum, you guys are great,  Now my 272 can rest a little.
Mike

Offline TORX

  • 5 cube
  • ***
  • Posts: 91
  • Karma: 1
Re: Stihl 084 AV dies at idle
« Reply #54 on: December 19, 2011, 07:44:30 pm »
Thanks for the update! 8) Did you get a adjustable H & L carb?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20431
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Stihl 084 AV dies at idle
« Reply #55 on: December 19, 2011, 08:08:25 pm »
Finally got a replacement carb from someone on ebay (2 weeks + shipping from Canada), and lo and behold, it works!  haven't cut with it, as its evening and dark outside, but is sounds good, and finally idles properly.  Thanks for all of your help on this forum, you guys are great,  Now my 272 can rest a little.
Mike

Was it the HT7 I sent you info on up in Can?

I had ask in the carb thread = I hope you are the one that bought the HT7 for $50 in the link I sent you.

Yes Torx IF it is the carb I sent info on it was fully adjustable.
REDNECK Saw Repair Getter Done

Offline mike84c

  • 3 cube
  • *
  • Posts: 23
  • Karma: 1
Re: Stihl 084 AV dies at idle
« Reply #56 on: December 20, 2011, 04:43:49 pm »
yea, it is, in fact it was pointed out to me by one of the forum members on ebay.  Installed it, spent about 10 minutes dialing it in, and cut with it for an hour today, ended up about 1-1/8 out on high needle, and 1 turn out on low.  Idles smoothly, runs good again.  Glad to have it back together, instead of in a couple of boxes, as I'm sure you can all relate.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1960
  • Karma: 169
Re: Stihl 084 AV dies at idle
« Reply #57 on: December 20, 2011, 06:28:27 pm »
Glad to hear it's running good now. Carb problems can be really irritating.

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1129
  • Karma: 81
084 crank
« Reply #58 on: August 25, 2013, 07:50:51 am »
Will a 088 crank work in a 084?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20431
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 084 crank
« Reply #59 on: August 25, 2013, 08:45:52 am »
I remember a thread on this on the  original RS's back in the day.  Off memory they dont  so I searched.

Jacob J says.  The cranks from the 088/880 and the 084 are not interchangeable. There's considerable differences in the stub shaft diameters and flywheel side tapers. It's not even feasible for a good machinist.
The 088/880 crank is not compatible with the 084 case halves. It's wider than the 084 crank and uses a different sized seal
on the flywheel side.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Woods ported 066

Started by Cut4fun . « 1 2 » Stihl

13 Replies
986 Views
Last post December 20, 2015, 10:12:31 pm
by Cut4fun .
37 Replies
1417 Views
Last post August 20, 2014, 11:35:33 am
by JohnG28
2 Replies
530 Views
Last post September 03, 2011, 11:53:35 am
by Cut4fun
9 Replies
640 Views
Last post February 25, 2012, 08:34:02 am
by 2spud
11 Replies
518 Views
Last post December 06, 2012, 07:08:32 am
by Al Smith
7 Replies
255 Views
Last post September 02, 2013, 05:12:17 pm
by Old Iron Logging
4 Replies
216 Views
Last post August 09, 2014, 04:39:02 pm
by SawTroll
0 Replies
92 Views
Last post October 13, 2014, 12:37:45 am
by 660magnum
3 Replies
152 Views
Last post January 14, 2015, 03:25:56 am
by 660magnum
29 Replies
520 Views
Last post September 28, 2015, 12:21:17 pm
by aclarke