Author Topic: Cant stand  (Read 5427 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4701
  • Karma: 216
  • OHIO REDNECK
Re: Cant stand
« Reply #20 on: December 28, 2015, 12:56:06 pm »
TTT

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Cant stand
« Reply #21 on: December 28, 2015, 03:36:59 pm »
Think I'm going to build mine with a 6x3' base and 6' long top 12 or 14" wide. 2x2" angle iron is $2 a foot at the scrap yard. Going to buy cants in 8' or 10' whatever he has when he gets to them this week or next.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Cant stand
« Reply #22 on: December 29, 2015, 06:20:30 pm »
Got all the metal cut today. Will weld it tomorrow.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23989
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Cant stand
« Reply #23 on: December 29, 2015, 06:29:51 pm »
Think I'm going to build mine with a 6x3' base and 6' long top 12 or 14" wide. 2x2" angle iron is $2 a foot at the scrap yard. Going to buy cants in 8' or 10' whatever he has when he gets to them this week or next.

Bet you go bigger. ;)  Be nice to put 10x10 side by side or 12x12's

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Cant stand
« Reply #24 on: December 29, 2015, 06:46:04 pm »
Think I'm going to build mine with a 6x3' base and 6' long top 12 or 14" wide. 2x2" angle iron is $2 a foot at the scrap yard. Going to buy cants in 8' or 10' whatever he has when he gets to them this week or next.

Bet you go bigger. ;)  Be nice to put 10x10 side by side or 12x12's
I shortened it a foot to go wider up top. I can always go and get more steel and make it longer or make a kicker off the end to get farther off the base. If I have 10' cants I can cut off both ends for about 4'.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Cant stand
« Reply #25 on: December 30, 2015, 02:42:26 pm »

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4701
  • Karma: 216
  • OHIO REDNECK
Re: Cant stand
« Reply #26 on: December 30, 2015, 02:50:49 pm »
Sweeeeeeeeeeet   8)

Do you have a back lip?  Where cant pulls into?

Wish my cant stand was wider now days for firewood saw testing with the big rounds.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4701
  • Karma: 216
  • OHIO REDNECK
Re: Cant stand
« Reply #27 on: December 30, 2015, 02:52:31 pm »
Need bar in middle IMO.   If you ever run 8x8 or 10x10 by themselves and when they get shorter.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Cant stand
« Reply #28 on: December 30, 2015, 03:06:27 pm »
One side has the angle turned up. I may weld a small loop for putting verticals in on both sides. I kept changing my mind and ran out of angle. Going to get 20' more and make 2 ribs down the middle and then some braces. Going to be a heavy thing when done. It's not far from taking 2 people to move.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23989
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Cant stand
« Reply #29 on: December 30, 2015, 04:07:51 pm »
LOL yep. on heavy

 

Related Topics

  Subject / Started by Replies Last post
37 Replies
7641 Views
Last post August 03, 2020, 11:00:40 pm
by 3000 FPS
0 Replies
270 Views
Last post December 05, 2022, 12:21:57 am
by FreakyLapidus