Author Topic: More home made stuff . (Read 1518 times)

Al Smith · « **on:** March 19, 2011, 09:08:15 am »

I tinker,it's just my nature .Some of the many stuff I've came up with .

Stihl clutch pullers made from M22 1.5 hydraulic fittings .Piston holder made from scrap nylon .Piston pin circlip installers for both 10 mm pins and one for those dinky 8 mm for a Stihl 200T that are so tiny once they get away from you they are seldom seen again .

Al Smith · « **Reply #1 on:** March 19, 2011, 03:01:16 pm »

This doesn't have a thing to do with chainsaws .It's a power seam roller for forming standing seam roofing .The cover is off to show the triple chain reduction .

Cut4fun . · « **Reply #2 on:** March 19, 2011, 04:59:33 pm »

Quote from: Al Smith on March 19, 2011, 09:08:15 am

I tinker,it's just my nature .Some of the many stuff I've came up with .

Piston pin circlip installers for both 10 mm pins and one for those dinky 8 mm for a Stihl 200T that are so tiny once they get away from you they are seldom seen again .

Al, I'll purchase a set from you if you have extras made up. I've lost a few 10mm myself.

Al Smith · « **Reply #3 on:** March 19, 2011, 07:44:43 pm »

I'll make up a bunch once I get the Monarch lathe back up and running .

The damned thing is a thyratron rectified DC drive which is acting up a tad bit .They aren't the easiest thing to figure out but I'm pretty sure I know what the problem is .

blsnelling · « **Reply #4 on:** March 19, 2011, 08:13:43 pm »

Quote from: Chainsawrepair on March 19, 2011, 04:59:33 pm

Al, I'll purchase a set from you if you have extras made up. I've lost a few 10mm myself.

I'd love to have one as well, Al.

Old Iron Logging · « **Reply #5 on:** March 19, 2011, 08:19:15 pm »

Can I get on the list also?

man of stihl · « **Reply #6 on:** March 19, 2011, 08:54:19 pm »

sounds like you're going to be a busy man Al!

wannab12 · « **Reply #7 on:** March 19, 2011, 11:08:33 pm »

Yep........sign me up too Al,or give us a good close up to copy

\

Steve

Al Smith · « **Reply #8 on:** March 20, 2011, 06:20:24 am »

Ha Ha .allright ,already .I'll make a bunch of them .

It doesn't take long .These were not some idea I hatched on my own but rather something I copied from work .They occasionally use "hand piners" for certain applications for the circlics for repinning pistons .

The difference is the larger pinners used for car engines have a slide inside which pops the clip in .The problem using that design on a 10 MM is the slide would be so tiny it would be like making a part for a watch .

Some day when I feel motivated I'll come up with a clip removal tool .For the moment a bent ice pick gets that job done .Crude but effective .

tommyhnavix · « **Reply #9 on:** January 21, 2012, 08:12:30 pm »

This is from an old Remington service bulletin.
Thought it might be a good patern for a tool if you need one.
Little slot on end removes clips very nicely. Good idea to cover with a rag after engaging tool before prying clip out though. Unless you like looking for part where ever they may go.

http://img7.imageshack.us/img7/3493/remingto69044pistonpinr.jpg

Chainsaw Repair

News:

Author Topic: More home made stuff . (Read 1518 times)

Al Smith

More home made stuff .

Al Smith

Re: More home made stuff .

Cut4fun .

Re: More home made stuff .

Al Smith

Re: More home made stuff .

blsnelling

Re: More home made stuff .

Old Iron Logging

Re: More home made stuff .

man of stihl

Re: More home made stuff .

wannab12

Re: More home made stuff .

Al Smith

Re: More home made stuff .

tommyhnavix

Re: More home made stuff .

Related Topics