Author Topic: Rotary tools Dremel Foredom Generic etc  (Read 1155 times)

0 Members and 0 Guests are viewing this topic.

Online srcarr52

  • 6 cube
  • ****
  • Posts: 288
  • Karma: 91
  • Location: IA
Re: Rotary tools Dremel Foredom Generic etc
« Reply #20 on: January 27, 2014, 10:36:41 am »
NSK makes a nice 90 degree head that works on the CC or Artco handpiece.
 Adam

Yes, but the best deal I've found on that head is $190.  Then you still have to buy or make the adapter. 

Online srcarr52

  • 6 cube
  • ****
  • Posts: 288
  • Karma: 91
  • Location: IA
Re: Rotary tools Dremel Foredom Generic etc
« Reply #21 on: January 27, 2014, 11:14:35 am »
Just so folks know.
I am thinking the one on the left are ready and for sale now by Shaun.   Since he told me one was shipped to me and my wife today.

Many Thanks for update. 




Yes, I have a few of the handpieces on the left available for $26 as well as #30 style ones for $17. 

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 19962
  • Karma: 418
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Rotary tools Dremel Foredom Generic etc
« Reply #22 on: January 27, 2014, 06:05:18 pm »
Just so folks know.
I am thinking the one on the left are ready and for sale now by Shaun.   Since he told me one was shipped to me and my wife today.

Many Thanks for update. 



Yes, I have a few of the handpieces on the left available for $26 as well as #30 style ones for $17. 

Just what the  boss wanted  ;D. Perfect fit to her small hands and she said cant wait to try it when it warms up.

Now to find my dang foot pedal I misplaced somewhere.   :'(
REDNECK Saw Repair Getter Done

Online farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1128
  • Karma: 124
  • Location: Hayesville, NC
Re: Rotary tools Dremel Foredom Generic etc
« Reply #23 on: May 17, 2014, 08:04:13 am »
Not a bad deal on a new Foredom/Grobet.  I'm happy w/mine.  Picked it up a while back didn't need another but couldn't pass it up for what I paid for it. http://www.ebay.com/itm/GROBET-USA-FLEXIBLE-SHAFT-MOTOR-/400706348267?pt=LH_DefaultDomain_0&hash=item5d4bf5a4eb
Shep

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3768
  • Karma: 138
  • OHIO REDNECK
Re: Rotary tools Dremel Foredom Generic etc
« Reply #24 on: May 17, 2014, 08:54:30 am »
I know the flex shaft and bigger hand piece I got from srcarr52 is a pleasure to use on my generic motor.  No vibrations like I had in my original generic set up.

I havent used the smaller one I got for the wife yet and neither has she.
REDNECK Saw Repair

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4231
  • Karma: 246
  • Location: Carpenter, Wyoming
Re: Rotary tools Dremel Foredom Generic etc
« Reply #25 on: May 17, 2014, 11:02:16 pm »
I would like to get an angled hand piece for my foredom one day.   Just a matter of time.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 19962
  • Karma: 418
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Rotary tools Dremel Foredom Generic etc
« Reply #26 on: October 21, 2014, 05:08:00 pm »
Just so folks know.
I am thinking the one on the left are ready and for sale now by Shaun.   Since he told me one was shipped to me and my wife today.

Many Thanks for update. 




Yes, I have a few of the handpieces on the left available for $26 as well as #30 style ones for $17. 

Wife loves it. Still get warm she says because she goes at it for hours non-stop.     

Do you still have them incase I want to set another back?
REDNECK Saw Repair Getter Done

Online srcarr52

  • 6 cube
  • ****
  • Posts: 288
  • Karma: 91
  • Location: IA
Re: Rotary tools Dremel Foredom Generic etc
« Reply #27 on: October 21, 2014, 06:02:17 pm »

Wife loves it. Still get warm she says because she goes at it for hours non-stop.     

Do you still have them incase I want to set another back?

The skinny ones will get a little warm running WOT for more than 10 minutes, you can't expect much better out of the size ball bearing that's in there. 

I still have #30's but I'm out of the skinny.  I can get more if you want some.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 19962
  • Karma: 418
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Rotary tools Dremel Foredom Generic etc
« Reply #28 on: October 21, 2014, 06:06:23 pm »
I'll let you know IF she kills it or not.  Might get some years out of it I hope.

 I am the type that trys to plan for the next one just incase.  Thanks man cause she is real happy with it so far.  10mins LOL  almost 4hrs now with 1 break.
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4231
  • Karma: 246
  • Location: Carpenter, Wyoming
Re: Rotary tools Dremel Foredom Generic etc
« Reply #29 on: October 21, 2014, 07:48:54 pm »
If you get any angle heads Shaun I am interested.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
tools

Started by stihlbro « 1 2 » Tool Shed

13 Replies
957 Views
Last post March 13, 2011, 01:29:10 pm
by wannab12
3 Replies
399 Views
Last post March 19, 2011, 12:14:49 am
by Kenskip1
37 Replies
4480 Views
Last post February 21, 2014, 03:18:14 am
by fordfairlane78
0 Replies
446 Views
Last post January 21, 2012, 08:10:35 pm
by tommyhnavix
9 Replies
1121 Views
Last post February 10, 2012, 06:25:49 pm
by Magnus
16 Replies
738 Views
Last post November 10, 2013, 01:59:46 pm
by 660magnum
1 Replies
190 Views
Last post June 29, 2013, 12:46:13 pm
by RoyM
1 Replies
216 Views
Last post November 15, 2013, 02:23:18 am
by KilliansRedLeo
1 Replies
380 Views
Last post October 13, 2014, 07:50:10 pm
by sharkey
1 Replies
121 Views
Last post September 21, 2016, 08:08:39 am
by mdavlee .