Author Topic: CCC Chainsaw Conservation Components - DefinitiveDave  (Read 1215 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17715
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: CCC Chainsaw Conservation Components - DefinitiveDave
« Reply #40 on: September 05, 2015, 03:37:36 pm »
Dave received the part today and installed in the guys saw.  Works perfect and didnt have any problems like your ebay ad tells about.  Thanks for the quick shipping too.
REDNECK Saw Repair Getter Done

Offline DefinitiveDave

  • 5 cube
  • ***
  • Posts: 89
  • Karma: 24
Re: CCC Chainsaw Conservation Components - DefinitiveDave
« Reply #41 on: September 28, 2015, 04:39:59 pm »
sorry I am generally such a slacker about getting on and participating

The web store produced less than 3% of our business volume, and while it was an easy way for the good saw guys to save a little money, it played havoc with out inventory and resulted in lots of lost sales because of that.
I am trying to find the right way to issue coupons that will work on Ebay.
The system we have set up there now is efficient as heck.  Once an item is properly set up we can add inventory whenever we get it.  The system handles our sales, buys the postage at a discount, provides the labels and even helps automate returns and reships.   It is FAST, and simple. 

If anyone has suggestions for items they would like to see me stock, either OEM Stihl or any aftermarket stuff, drop me a line.

Dave
seeking new in box 046, standard or arctic model



Ebay Store: http://stores.ebay.com/Chainsaw-Conservation-Components

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: CCC Chainsaw Conservation Components - DefinitiveDave
« Reply #42 on: September 29, 2015, 01:01:14 am »
How about OEM Husky stuff?  I'll send you another list of AM stuff soon.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline DefinitiveDave

  • 5 cube
  • ***
  • Posts: 89
  • Karma: 24
Re: CCC Chainsaw Conservation Components - DefinitiveDave
« Reply #43 on: September 29, 2015, 07:48:57 am »
Maybe I am a doofus, but aren't there a lot of actual Husqvarna dealers that sell online?
I might be in the dark on that cause I am a Stihl-nerd but I thought they weren't under the same restrictions as the Stihl dealers.
I have a couple of good buddies at a somewhat local Husky dealership but damn they are so slow to get parts.
I am going to put in a request for some Husky specialty tools.   Brake spring reset tool is on the list, is there anything else I should look into?
Dave
seeking new in box 046, standard or arctic model



Ebay Store: http://stores.ebay.com/Chainsaw-Conservation-Components

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 424
  • Karma: 79
  • Location: Newcomerstown ,Ohio
Re: CCC Chainsaw Conservation Components - DefinitiveDave
« Reply #44 on: September 29, 2015, 10:13:15 am »
Maybe I am a doofus, but aren't there a lot of actual Husqvarna dealers that sell online?
I might be in the dark on that cause I am a Stihl-nerd but I thought they weren't under the same restrictions as the Stihl dealers.

Dave

Dolmar, Echo, Jonsered, Husqvarna  are all available from a ton of different suppliers but suppliers that actually stock what they are selling is a different story. Most places drop ship which causes lots of parts that dont ship out for weeks while they wait on the distributor to get the parts in. That is the reason i dont advertise the jonsered/echo side of my business. I dont have the parts inventory to support online sales IMO.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline DefinitiveDave

  • 5 cube
  • ***
  • Posts: 89
  • Karma: 24
Re: CCC Chainsaw Conservation Components - DefinitiveDave
« Reply #45 on: September 29, 2015, 03:21:16 pm »
I guess I figure since the Stihl distributer is pretty close that all chainsaw manufacturers must have warehouses and dealers everywhere.

I can get Husky stuff but am a total dummy about it. Even when I bring in Meteor items for huskys I just hope nobody has a technical question :)
If there are common OEM husky items that people need a lot I would be happy to carry them but I figure the common stuff is what all the dealers have and to stand out I would have to know enough to have less common stuff on hand.
So much to learn, brain is so small and smooshy
D
seeking new in box 046, standard or arctic model



Ebay Store: http://stores.ebay.com/Chainsaw-Conservation-Components

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: CCC Chainsaw Conservation Components - DefinitiveDave
« Reply #46 on: September 29, 2015, 07:24:03 pm »
Husky dealers don't carry much of the 200 series parts anymore.  I'll make a list for you of popular parts.  Some aren't available from Husky anymore, but are available from the AM.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17715
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Dave incoming email from CRS email. ;)
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Dave incoming email from CRS email. ;)

And another one on the way... 8)
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cat-Face Timber

  • 4 cube
  • **
  • Posts: 70
  • Karma: 8
Hey DDave,

Do you have access to a am Husky kit, the entire powerhead?
Like your stihls?

I would be interested.
MIGHTY HUSKY 235
BESTEST SAW EVER!

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
504 Views
Last post March 25, 2011, 10:58:15 pm
by sharkey
2 Replies
166 Views
Last post September 28, 2013, 11:03:05 pm
by oldtimber
14 Replies
795 Views
Last post September 25, 2013, 04:31:19 am
by fordfairlane78
2 Replies
199 Views
Last post October 18, 2013, 08:29:46 pm
by 660magnum
3 Replies
156 Views
Last post December 02, 2013, 10:20:11 am
by Cut4fun .
5 Replies
697 Views
Last post December 29, 2013, 11:23:57 am
by fordfairlane78
21 Replies
996 Views
Last post April 18, 2014, 04:36:19 pm
by dutchsawdoctor
3 Replies
353 Views
Last post October 19, 2014, 07:04:50 am
by SOLOmann
9 Replies
589 Views
Last post June 03, 2014, 09:36:35 am
by KilliansRedLeo
4 Replies
87 Views
Last post October 15, 2014, 03:39:36 pm
by aclarke