« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: Left Coast Supplies  (Read 984 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Left Coast Supplies
« on: February 14, 2014, 03:30:43 pm »
Quote from: Philbert on February 11, 2014, 06:51:03 pm
This is from Grande Dog, posted on another forum (maybe he needs an invite?):

Howdy All,

I hope this message finds everything well with you and yours.

Been having some crazy times out west since Bailey's showed us the door. Myself and a few other Bailey's expat's have gotten together and formed an LLC by the name of Left Coast Supplies. To kick things off we're having a "while supplies last" special on some GB bars. They're all made in Australia and the prices are set to move. The site is just coming on so I'm sure we'll have tons of growing pains in the near future. We'll be bringing more product on as soon as we can. You can catch us at www.leftcoastsupplies.com


Regards
Gregg

I see Gregg is here and Welcome to the site.

Gregg's info

Left Coast Supplies
1615B South Main Street
Willits CA 95490
888-995-7307   707-602-0141
www.leftcoastsupplies.com
gregg@leftcoastsupplies.com

Hmmmm 36" GB Pro Top to my door for what just the bar cost before shipping elsewhere.    8)
Logged
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Left Coast Supplies
« Reply #1 on: February 14, 2014, 03:37:27 pm »
Yeah good deals on those bars.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Left Coast Supplies
« Reply #2 on: February 14, 2014, 04:05:10 pm »
Whats the difference in these 2 GB pro top bars?   

Is 1 solid nose and not shown in pic maybe?

HV36-50PA  http://leftcoastsupplies.com/product/36-gb-pro-top-bar-38-050-2/

SN36-50PA    http://leftcoastsupplies.com/product/36-gb-pro-top-bar-38-050/
Logged
REDNECK Saw Repair Getter Done

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Left Coast Supplies
« Reply #3 on: February 14, 2014, 04:57:19 pm »
Should be the same
Logged

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 215
  • Magnesium and Iron.
  • Location: Northern California.
Re: Left Coast Supplies
« Reply #4 on: February 14, 2014, 05:15:02 pm »
Very cool.  Willits is only 88 miles away, and I drive through there sometimes.  Now Gregg's gotta come to our next GTG.8)
Logged
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Grande Dog

  • 3 cube
  • *
  • Posts: 24
  • Karma: 17
    • Left Coast Supplies
Re: Left Coast Supplies
« Reply #5 on: February 14, 2014, 05:28:08 pm »
     Howdy,

   Thanks for the heads up on the bars. Had a mix up on the Oregon equivalent numbers. The SN36 is actually a 12mm Stihl mount which is like the Oregon D025 mount.
Regards
Gregg
Logged
Left Coast Supplies
1615B South Main Street
Willits CA 95490
888-995-7307   707-602-0141
www.leftcoastsupplies.com
gregg@leftcoastsupplies.com

Offline Philbert

  • Gas Hotsaw
  • ******
  • Posts: 533
  • Karma: 71
Re: Left Coast Supplies
« Reply #6 on: February 14, 2014, 05:28:19 pm »
Welcome to CSR Grande Dog!

Philbert
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Left Coast Supplies
« Reply #7 on: February 14, 2014, 06:56:16 pm »
Quote from: Grande Dog on February 14, 2014, 05:28:08 pm
     Howdy,

   Thanks for the heads up on the bars. Had a mix up on the Oregon equivalent numbers. The SN36 is actually a 12mm Stihl mount which is like the Oregon D025 mount.
Regards
Gregg

Thank You.  8)



Logged
REDNECK Saw Repair Getter Done

Offline countryhog

  • 6 cube
  • ****
  • Posts: 165
  • Karma: 13
  • Location: NW arkansas
Re: Left Coast Supplies
« Reply #8 on: February 14, 2014, 07:48:38 pm »
glad to see ya landed on yer feet greg. already bookmarked your site.
do yall take usps money orders?
semper fi bro.
Logged
now is never here but the past is always present.
semper fi ya'll

Offline Grande Dog

  • 3 cube
  • *
  • Posts: 24
  • Karma: 17
    • Left Coast Supplies
Re: Left Coast Supplies
« Reply #9 on: February 18, 2014, 04:45:49 pm »
     Howdy,

   Thanks for you support.
   Post office money orders work for us.

Regards
Gregg
Logged
Left Coast Supplies
1615B South Main Street
Willits CA 95490
888-995-7307   707-602-0141
www.leftcoastsupplies.com
gregg@leftcoastsupplies.com
Pages: [1] 2 3 4   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
1 Replies
295 Views 		Last post September 06, 2012, 02:19:05 pm
by Cut4fun
6 Replies
264 Views 		Last post October 04, 2012, 01:26:19 pm
by Cut4fun
9 Replies
589 Views 		Last post May 03, 2013, 01:44:44 pm
by HMLT360Pro
15 Replies
756 Views 		Last post December 07, 2013, 03:39:46 pm
by Arrow13
25 Replies
1171 Views 		Last post November 16, 2018, 11:46:20 am
by Cut4fun .
4 Replies
306 Views 		Last post November 16, 2018, 11:50:33 am
by Cut4fun .
3 Replies
65 Views 		Last post January 21, 2015, 11:01:22 pm
by Craigwell
7 Replies
323 Views 		Last post September 11, 2015, 03:44:31 pm
by Cut4fun .
10 Replies
476 Views 		Last post December 17, 2016, 05:22:18 am
by Eccentric