Chainsaw Repair

Quote from: adam32 on March 05, 2011, 11:46:44 pm

Also looking for a 372xp flywheel, it can have broken fins, its going to get shaved.

Cut shaved flywheel off my 372 is in route. Let me know how the 3 way testing goes.

5000 clutch shoes have been shipped too.

All other items have been shipped today also. Just so everyone knows without me having to pm everyone separate pm's.

Got the flywheel today, it and the stocker both weigh 11oz... so not sure if it will make much difference. Once I get another stocker and shave it all the way down I'll do some testing...

What was you using for a scale? Sure dont sound right for the amount of fins cut off.

I think the theory on those cut down like I sent is less resistance.

Digital fish scale...probably not the most accurate thing to use.

The cut one looked a little different and had more metal on the inside then the stocker, that's where the weight came from.

But your right, I think the theory is less resistance...we will find out!! 

Got the flywheel today, it and the stocker both weigh 11oz... so not sure if it will make much difference. Once I get another stocker and shave it all the way down I'll do some testing...

The cut one looked a little different and had more metal on the inside then the stocker, that's where the weight came from.

Cut one was a XPG flywheel.

I just figured out why the shaved one weighed the same as the non xpg stock one. Dont the flywheels on the XPG models have a extra magnet inside the back of flywheel for the heated handles. Doh!