Chainsaw Repair

Are you missing the carburetor?

The pic of the one in the poulan 3450 carb thread was member chainsawr.  http://chainsawrepair.createaforum.com/index.php?action=profile;u=193

If you dont see anymore on his site. Just PM email or call. He usually has stuff not listed.  @Chainsawr

http://store.chainsawr.com/

I just put a new HDA-66 on an Echo 600p that Ive been playing around with.  Am I correct that the HDA-77 uses the nozzle style high side check valve and the HDA-66 uses the screen?  Both have the 15.8 venturi according to Walbro.  Both are listed as Mac carbs.       

If this is what your looking for, send me an offer via private message and we will go from there.   

Hi Cut,
I basically searched through piles of carbs to find that Mac HDA that had the venturi as close to the Echo cs-620 application of Walbro HDA-316 (15.8 V).  The 600p came with HDA-268 which is 15.0 V.  I was lucky to find a brand new Mac carb which you know doesnt happen every day.  I also got lucky with the placement of the throttle and choke shafts and didnt have to work around those too. 

For this 600 project Im going to try the HDA-63 (8000) carb next.  If this guy wants this Mac carb I will buy the one you have for sale.   

Thanks,
Bob