Author Topic: Broken fins on flywheel 365 Husky (Read 504 times)

alsled · « **on:** January 11, 2014, 04:11:05 pm »

Starer pawls busted off the fins where the pawl contacts it. Gave it a few shots with the spool gun and some grinding, will see what happens.

KilliansRedLeo · « **Reply #1 on:** January 11, 2014, 04:22:56 pm »

Can't see it very well but it looks like the key is sheared off the flywheel. What did you use to keep the magnets cool. Excessive heat gives them fits!

alsled · « **Reply #2 on:** January 11, 2014, 04:41:38 pm »

Key is fine, its just not visible in the pic from the angle. Thats the great thing about a spool gun over tig, its a 1 sec push of the trigger, do that 3 times and you have a lump of al to work with. Tig you have to hold the arc there longer, so things get hotter. After I welded both fins, I could pick the flywheel up with my hand, so no excessive heat.

KilliansRedLeo · « **Reply #3 on:** January 11, 2014, 05:04:07 pm »

Nice job!

3000 FPS · « **Reply #4 on:** January 13, 2014, 11:33:04 pm »

Nice job. That is true with a tig you would have to get the arch going and then get it hot enough for a puddle.

alsled · « **Reply #5 on:** January 16, 2014, 08:23:24 pm »

Thanks!, Not purdy, but it will work.

Chainsaw Repair

News:

Author Topic: Broken fins on flywheel 365 Husky (Read 504 times)

alsled

Broken fins on flywheel 365 Husky

KilliansRedLeo

Re: Broken fins on flywheel 365 Husky

alsled

Re: Broken fins on flywheel 365 Husky

KilliansRedLeo

Re: Broken fins on flywheel 365 Husky

3000 FPS

Re: Broken fins on flywheel 365 Husky

alsled

Re: Broken fins on flywheel 365 Husky

Related Topics