« previous next »
Pages: 1 [2]   Go Down

Author Topic: T-Post puller  (Read 1530 times)

0 Members and 0 Guests are viewing this topic.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4695
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: T-Post puller
« Reply #10 on: January 19, 2015, 05:58:32 pm »
Ok here is a T-post puller I just finished up yesterday and pulled a post with it today.
All can say is I would have had a heck of time pulling out that post with out it.   Works great.
Thanks for the ideas and examples.

Logged
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23517
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: T-Post puller
« Reply #11 on: January 19, 2015, 07:24:23 pm »
Yep best trade I ever made. Some guy on racesaws made mine for a 029 or super parts saw.

Made my life so much easier every spring.


Looks great Roger.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23517
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: T-Post puller
« Reply #12 on: January 19, 2015, 07:25:12 pm »
Looks like the high lift jack modified?
Logged

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4695
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: T-Post puller
« Reply #13 on: January 19, 2015, 08:25:24 pm »
Quote from: Cut4fun_ on January 19, 2015, 07:25:12 pm
Looks like the high lift jack modified?

Just an old bumper jack that I had laying around.
Logged
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23517
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: T-Post puller
« Reply #14 on: January 19, 2015, 09:04:40 pm »
Great use for them.  Nice idea.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23517
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: T-Post puller
« Reply #15 on: November 24, 2015, 12:50:18 pm »
Found this while looking for that 92cc IPL. Little different design so saving post puller pic.



Logged

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4695
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: T-Post puller
« Reply #16 on: November 24, 2015, 10:34:12 pm »
I had one of those out side freeze proof hydrants that was no longer connected and down into the ground about 5 feet.   I clamped a good pair of vice grips to it and lifted it out with the bumper jack t-post puller I made.   It had been in the ground for about ten years.    I am going to re- purpose the pipe into another peavy.   My last one worked real good on big logs but would not fit the small ones very good.
Logged
PP 505, 475, 445.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: T-Post puller
« Reply #17 on: November 24, 2015, 11:13:01 pm »
I've used a floor jack and chain to pull them out.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4695
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: T-Post puller
« Reply #18 on: November 24, 2015, 11:33:10 pm »
That sounds even more red neck than my bumper jack.  How did you attach the chain.
Logged
PP 505, 475, 445.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: T-Post puller
« Reply #19 on: November 25, 2015, 07:02:55 am »
The 1/4" chain had the narrow link hooks on the ends.

I made a few wraps around the post to take up the slack with a "C" clamp above the chain.

I had to put a board under the front wheels of the jack
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .
Pages: 1 [2]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
1 Replies
190 Views 		Last post May 26, 2011, 09:25:06 pm
by rgclmc
16 Replies
2120 Views 		Last post November 22, 2011, 09:24:11 am
by Al Smith
6 Replies
1895 Views 		Last post March 09, 2012, 06:30:02 pm
by Cut4fun .
16 Replies
1559 Views 		Last post May 21, 2012, 05:10:04 pm
by man of stihl
1 Replies
515 Views 		Last post July 25, 2015, 12:21:40 pm
by Cut4fun .
15 Replies
702 Views 		Last post April 05, 2016, 03:10:56 pm
by 3000 FPS
0 Replies
228 Views 		Last post November 03, 2016, 01:27:09 pm
by Cut4fun .
3 Replies
310 Views 		Last post December 30, 2016, 04:16:11 pm
by pleasant
7 Replies
921 Views 		Last post February 25, 2017, 03:59:30 am
by dutchsawdoctor
2 Replies
205 Views 		Last post January 31, 2023, 06:59:28 am
by Cut4fun .