Author Topic: Table from beetle kill pine.  (Read 587 times)

0 Members and 0 Guests are viewing this topic.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Table from beetle kill pine.
« on: September 12, 2019, 07:34:14 pm »
So this was my latest project from lodge pole beetle kill.

The table is almost 8 ft long and 42 inches across.   It is also 2 3/4 inches thick.    I had to put it in my barbeque area with the tractor and straps. 
PP 505, 475, 445.

Share on Facebook Share on Twitter

Like Like x 1 Winner Winner x 1 Informative Informative x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21954
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Table from beetle kill pine.
« Reply #1 on: September 13, 2019, 06:10:27 pm »
Wow super nice.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Table from beetle kill pine.
« Reply #2 on: September 14, 2019, 02:20:25 pm »
PP 505, 475, 445.

Offline pete

  • Piped Saw
  • *****
  • Posts: 493
  • Karma: 37
Re: Table from beetle kill pine.
« Reply #3 on: September 15, 2019, 08:08:50 am »
great looking surfacing jig using the router looks very effective
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Table from beetle kill pine.
« Reply #4 on: September 15, 2019, 10:53:54 am »
great looking surfacing jig using the router looks very effective


Thanks.   It is a router sled made to flatten large pieces of wood.    Got the idea from you tube.   Made this one from angle iron.   
PP 505, 475, 445.
Like Like x 1 View List

Online ssidwell

  • 3 cube
  • *
  • Posts: 11
  • Karma: 3
Re: Table from beetle kill pine.
« Reply #5 on: September 17, 2019, 10:19:58 am »
Nice looking table.

Steve Sidwell, sent from my Samsung On5 using Tapatalk

Like Like x 2 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21954
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Table from beetle kill pine.
« Reply #6 on: September 17, 2019, 12:11:04 pm »
Nice looking table.

Steve Sidwell, sent from my Samsung On5 using Tapatalk



Welcome Steve

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21954
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Table from beetle kill pine.
« Reply #7 on: September 17, 2019, 12:12:24 pm »
great looking surfacing jig using the router looks very effective


Thanks.   It is a router sled made to flatten large pieces of wood.    Got the idea from you tube.   Made this one from angle iron.   

I was wondering if you had a planner to do the boards before putting together. 

So you saying you used the router to do that?
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Table from beetle kill pine.
« Reply #8 on: September 17, 2019, 02:20:28 pm »
great looking surfacing jig using the router looks very effective


Thanks.   It is a router sled made to flatten large pieces of wood.    Got the idea from you tube.   Made this one from angle iron.   

I was wondering if you had a planner to do the boards before putting together. 

So you saying you used the router to do that?

Yep the router sits in that sled and you run it with a planer bit in it.    You cut about an inch at a time and then move it to the next spot.     if you look at the picture real close you can see some faint lines from running the router back and forth to get it flat. 
PP 505, 475, 445.
Winner Winner x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Table from beetle kill pine.
« Reply #9 on: September 17, 2019, 02:21:12 pm »
Nice looking table.

Steve Sidwell, sent from my Samsung On5 using Tapatalk



Hello Steve.   
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
998 Views
Last post March 22, 2012, 01:50:02 pm
by DeerMeadowFarm
11 Replies
283 Views
Last post January 14, 2018, 03:20:50 pm
by HolmenTree
2 Replies
200 Views
Last post June 15, 2018, 11:42:19 am
by dpjones