Author Topic: 12" picco stihl 026  (Read 285 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18257
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
12" picco stihl 026
« on: December 18, 2015, 12:48:15 pm »
Any ideas on a 12" 44dl 45dl bar for a 026?  No such animal as I can find.  Thinking of using a old bar and make my own.
REDNECK Saw Repair Getter Done

Social Buttons


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18257
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 12" picco stihl 026
« Reply #1 on: December 18, 2015, 02:01:07 pm »
Found a 12" picco bar that will work on a 026 mount when modified. Just need to open the slot, elongate bar tensioner hole and oiler hole.  8)
REDNECK Saw Repair Getter Done

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 170
Re: 12" picco stihl 026
« Reply #2 on: December 18, 2015, 06:33:55 pm »
Kev, I did the same for an 026. Take care not to delaminate the bar when grinding the heel and slot.   Those plastic inserts at the oil hole tends to melt with grinding heat.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18257
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 12" picco stihl 026
« Reply #3 on: December 18, 2015, 07:09:05 pm »
Thanks for the heads up. 

I have tossed some good laminated bars in past trying to do stuff with them in past.  Had a few that worked out great too. 
REDNECK Saw Repair Getter Done

Offline Chris-PA

  • 6 cube
  • ****
  • Posts: 203
  • Karma: 28
Re: 12" picco stihl 026
« Reply #4 on: December 18, 2015, 08:49:54 pm »
Seems like a lot of bar for one of those......

Offline Moparmyway

  • Piped Saw
  • *****
  • Posts: 309
  • Karma: 42
Re: 12" picco stihl 026
« Reply #5 on: December 20, 2015, 08:34:56 am »
Seems like a lot of bar for one of those......

I just spit my wheaties out of my nostrils ..................  ;D

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1880
  • Karma: 124
  • Location: MD
Re: 12" picco stihl 026
« Reply #6 on: December 23, 2015, 07:41:01 am »
Cut I have a 12" Picco bar you can use if you mess up the one you have, when you modify it to fit the 026. That seems to be a good bit of work to make it fit just looked at the 026 I have with that bar. Oil hole, tensioner hole and stud slot. Would you like me to try and mod mine. I got the bars from a dealer for like $10 bucks a piece. They just wanted them gone.
FEAR NO TREE. FEAR GOD.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18257
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 12" picco stihl 026
« Reply #7 on: December 23, 2015, 08:24:03 am »
Cut I have a 12" Picco bar you can use if you mess up the one you have, when you modify it to fit the 026. That seems to be a good bit of work to make it fit just looked at the 026 I have with that bar. Oil hole, tensioner hole and stud slot. Would you like me to try and mod mine. I got the bars from a dealer for like $10 bucks a piece. They just wanted them gone.

You have a 12" picco 050 44dl extra to do this to?    If so yes.  I may need to drill one extra bar tensioner hole to use the 45dl chain too.

Let me know and Thanks.

I have to do all my stuff by hand mostly, you?  Using File, drill, grinder, dremel etc.
REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1880
  • Karma: 124
  • Location: MD
Re: 12" picco stihl 026
« Reply #8 on: December 23, 2015, 01:34:46 pm »
Yes on the bar and yes on the by hand. I will have some time over the next couple of days to do it. It is a wet sloppy mess here.
FEAR NO TREE. FEAR GOD.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3730
  • Karma: 133
  • OHIO REDNECK
Re: 12" picco stihl 026
« Reply #9 on: December 23, 2015, 02:04:47 pm »
We got time so know hurry.  Thanks.   Let me know what I owe for bar shipping etc.

It is for the chain build off 2nd round.
REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
185 Replies
9332 Views
Last post November 06, 2016, 12:22:58 pm
by HolmenTree
0 Replies
138 Views
Last post July 28, 2011, 01:27:28 pm
by mweba
1 Replies
384 Views
Last post May 25, 2012, 05:43:04 pm
by Cut4fun .
0 Replies
207 Views
Last post June 18, 2012, 03:18:12 pm
by Cut4fun .
11 Replies
751 Views
Last post July 13, 2015, 03:26:16 am
by fisaw
6 Replies
106 Views
Last post November 08, 2014, 09:59:01 pm
by Cut4fun .
4 Replies
115 Views
Last post April 27, 2015, 12:01:09 pm
by Cut4fun .
7 Replies
240 Views
Last post September 11, 2015, 03:44:31 pm
by Cut4fun .
44 Replies
830 Views
Last post January 24, 2017, 11:05:17 pm
by HolmenTree
8 Replies
189 Views
Last post January 07, 2016, 08:08:04 pm
by 3000 FPS