Forum > Dolmar Makita
Dolmar info
(1/1)
Cut4fun .:
Just saving some dolmar chainsaw info posted by cutting edge cuttinscott
117,119,120 3.7 cu. in. 117 point ignition, 119 elec. ign, 120 was a 119 with better carb.
120super was a 4.1 cubic inch based off the 120 chassis
116si 3.7 cubic inch with beefed up chassis, Injection start carb, and heavier duty chain brake band also improved ignition assy.
120si 4.15 cubic inch shared chassis with 116si
PS6000 replaced 116si with eco friendly oil pump improved chain brake and better fitting air filter cover
PS6800 replaced 120si with shared chassis with PS6000
123 was the same era as the 119/120 and was built from the 133 chassis was soon replaced in the line up when the 120 super was introduced
Today the PS6400-PS7900 have replaced these models
The bar mount for the 112-PS6800 was the Windsor CJL / Oregon Z095,A095,K095
The Bar Mount for the 123-166 was the Windsor / DM Oregon D033
Todays PS6400-PS9010 use the Windsor EM / Oregon D009
The PS9000 used the D033 mount
Hope this helps with the History
Scott
660magnum:
At one time Dolmar sold replacement bar studs that fit the PS6000/6800 with different shoulder diameters on them that fit K095, D009, and S25 bar mount types. So it is possible to come across a saw that fit one of these other bar mount types? Though the stud to stud spacing was for the K095!
Cut4fun .:
Like that 9000 I had got in. We saw it had 2 different bar mounts on it too. One was D009
Navigation
[0] Message Index
Go to full version