Forum > Efco Olympyk Oleo-Mac
Efco MT 5200 project..
(1/1)
weimedog:
https://www.youtube.com/watch?v=tX8D6NhUPZw
Part two...test cuts.
https://www.youtube.com/watch?v=W7bhdLES3gA
Cut4fun .:
Will watch later when we got a good rain or snow. Be interesting to see I hope.
farmboy:
Year or 2 ago there was a Efco 152 (old model 5200) used commercially last I heard had 1500 tanks run through it. Only normal maintenance. 952/152-956/156-962/162 are Efco's best IMO.
Shep
Cut4fun .:
Art ran those 152 for a bit https://chainsawrepair.createaforum.com/efco/efco-152/
deezlfan:
--- Quote --- 952/152--962/162 are Efco's best IMO.
--- End quote ---
Got to agree. Bought a green JD CS-56 [956/156] beginning of July 2009 after JD discontinued the EFCO saws. Posted this photo the first day on Magnus' site. It has since passed 100 full cord of ash, maple and cherry. It developed a split in the air filter cover that I fixed with aluminum tape and it has consumed a chain catcher. Other than the typical bar and chains that just plain wore out, it hasn't had any more than a cleaning each week. Still on the original plug.
[ Guests cannot view attachments ]
Navigation
[0] Message Index
Go to full version