Author Topic: Husqvarna 365 X-Torq  (Read 13306 times)

0 Members and 1 Guest are viewing this topic.

Offline John Mc

  • 5 cube
  • ***
  • Posts: 137
  • Karma: 14
  • Location: Addison Co, VT
Re: Husqvarna 365XP X-Torq
« Reply #30 on: December 02, 2011, 08:37:39 am »
I'm still not seeing it. I went to http://www.husqvarna.com/us, then clicked on "pro Forestry", then "XP Saws". The saws are listed in order of displacement. I see a 357XP, then a 562, then a 372. No 365 to be seen. (In fact, the only "XP T" saw I see listed is the 338). The pro section also has a link for "powerful robust saws" (i.e. non-XP saws with pro-type construction). It's not in there either.

Are you using some other US link?

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline John Mc

  • 5 cube
  • ***
  • Posts: 137
  • Karma: 14
  • Location: Addison Co, VT
Re: Husqvarna 365XP X-Torq
« Reply #32 on: December 02, 2011, 09:25:30 am »
Thanks. Strange that it shows up in the "homeowner" section, but not in the pro section. I had checked the pro section and the landowner section. It never occurred to me to check the homeowner section. I might have even missed it there, since it's posted out of order (after the biggest XP saws, rather than in the middle of the lineup)

So what is it that makes this an XT as opposed to an XP?

Offline John Mc

  • 5 cube
  • ***
  • Posts: 137
  • Karma: 14
  • Location: Addison Co, VT
Re: Husqvarna 365XP X-Torq
« Reply #33 on: December 02, 2011, 09:36:45 am »
If I followed this thread correctly, the list on the 365XT is around $600+ (less than the 357XP or the 562XP), but it's the same saw as a 372 ($840 list) once you remove the restrictor plate? How tough can that be?

I'm not really in the market for a saw in this size range, but that's got me thinking...

John

Offline TORX

  • 5 cube
  • ***
  • Posts: 91
  • Karma: 1
Re: Husqvarna 365XP X-Torq
« Reply #34 on: December 02, 2011, 10:54:28 am »


So what is it that makes this an XT as opposed to an XP?
XT= Strato

Offline woodgrenade

  • pruner
  • *
  • Posts: 1
  • Karma: 0
Re: Husqvarna 365XP X-Torq
« Reply #35 on: December 11, 2011, 09:01:44 pm »
I'm pretty darn excited about this saw.  Could be my first new saw!! :)

Offline billyclay

  • 3 cube
  • *
  • Posts: 23
  • Karma: 0
Re: Husqvarna 365XP X-Torq
« Reply #36 on: December 14, 2011, 09:25:39 pm »
just got one of these where is the restrictor plate . is it between filter and carb or after carb. pictures would be a big help

Offline albert

  • 3 cube
  • *
  • Posts: 7
  • Karma: 0
Re: Husqvarna 365XP X-Torq
« Reply #37 on: December 15, 2011, 11:23:39 am »
 Hi guys, Billy if your going to remove the restrictor yourself, why not just pull the whole deal off the cylinder and post up what you find.

Offline John Mc

  • 5 cube
  • ***
  • Posts: 137
  • Karma: 14
  • Location: Addison Co, VT
Re: Husqvarna 365XP X-Torq
« Reply #38 on: December 15, 2011, 01:18:12 pm »
I'm curious to see what  come up with, Billy. I wonder if you'll need some sort of spacer to take the place of the restrictor plate to keep the spacing the same so things line up (or maybe just drill the plate out?)

Offline billyclay

  • 3 cube
  • *
  • Posts: 23
  • Karma: 0
Re: Husqvarna 365XP X-Torq
« Reply #39 on: December 16, 2011, 06:35:49 pm »
took saw apart found a baffle in intake elbow between filter and carb and a divider in intake manifold that splits into 3 sections between carb and cylinder which do i remove as i do not have a 372 to compare to

 

Related Topics

  Subject / Started by Replies Last post
10 Replies
2518 Views
Last post May 03, 2011, 09:49:54 pm
by blsnelling
2 Replies
630 Views
Last post July 23, 2012, 07:49:15 am
by 660magnum
9 Replies
1070 Views
Last post November 17, 2012, 09:05:18 pm
by Mw1995
5 Replies
358 Views
Last post January 05, 2013, 11:35:08 pm
by 660magnum
0 Replies
82 Views
Last post March 03, 2013, 08:14:40 pm
by Cut4fun
19 Replies
790 Views
Last post November 10, 2013, 08:11:53 pm
by KilliansRedLeo
7 Replies
219 Views
Last post February 28, 2016, 07:32:00 pm
by 660magnum
2 Replies
190 Views
Last post August 22, 2016, 01:46:46 pm
by dannyupsolate
2 Replies
105 Views
Last post May 07, 2018, 02:36:08 pm
by Cut4fun .
4 Replies
155 Views
Last post July 12, 2018, 09:03:40 am
by ray benson