Author Topic: Husqvarna 455 Rancher will not hit a lick "NO Start"  (Read 106 times)

0 Members and 0 Guests are viewing this topic.

Offline yotakubota

  • pruner
  • *
  • Posts: 1
  • Karma: 0
Husqvarna 455 Rancher will not hit a lick "NO Start"
« on: March 11, 2021, 08:31:09 pm »
Thanks for allowing me in and good evening to all.
I have a Husqvarna 455 Rancher was running fine as I was finishing cutting a 16" log it just quit. Still had fuel, would not restart nor would it later. This is what I have done so far, checked spark have spark, replaced plug, straight gas into spark plug hole, sprayed carb cleaner in same hole, removed flywheel checked key it is good, checked coil gap set to buis card. Removed muffler and cleaned no issues was very clean. I have done all the above and it has yet to try to start, compression seems good, same as always. Removed kill wires still no start. I've never had such a problem. Help appreciated.

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4305
  • Karma: 188
  • OHIO REDNECK
I would have checked all you checked. 

Had spark, getting mix, had good compression checked by pulling rope and psi gauge. I have had a few fool me and only when I pulled cylinder did I find a  slight score with stuck ring off to the side that you cant see from ext, int or plug hole. 

Good Luck.
REDNECK Saw Repair
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4531
  • Karma: 283
  • Location: Carpenter, Wyoming
You need to put a compression gauge on it and see what it really is.    You have checked everything else and that is all this is left.   Pulling on it is not good enough.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
497 Views
Last post May 25, 2012, 05:43:04 pm
by Cut4fun .
57 Replies
678 Views
Last post January 01, 2014, 07:56:48 pm
by Cut4fun .
2 Replies
326 Views
Last post February 22, 2014, 05:47:21 pm
by Gregg MacPherson
6 Replies
302 Views
Last post November 08, 2014, 09:59:01 pm
by Cut4fun .
3 Replies
1405 Views
Last post March 11, 2015, 07:31:43 pm
by Cut4fun .
7 Replies
513 Views
Last post September 11, 2015, 03:44:31 pm
by Cut4fun .
5 Replies
259 Views
Last post April 15, 2016, 09:09:13 pm
by SawTroll
1 Replies
210 Views
Last post April 11, 2017, 01:43:42 pm
by Cut4fun .
0 Replies
150 Views
Last post October 29, 2017, 09:09:27 pm
by weimedog
8 Replies
292 Views
Last post March 20, 2018, 11:13:46 am
by jcsmith