Chainsaw Repair
Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Tool Shed => Topic started by: man of stihl on May 09, 2011, 06:52:17 pm
-
When you need to do some test cuts and your cutting area outback is still standing in water. Improvise and overcome the set back. aka redneck. 😋😉
-
Some Dave Smith at CCC is having made for sale.
I make those.
Get with Nate Blakeslee he wants 2 made for the Pa show at the fair.
-
Some Dave Smith at CCC is having made for sale.
I make those.
-
Seen the PB pos site was blocking some of my ole cant stand pics. So here is the one I had way back.
-
Something alittle different to hold for both end racing.
-
Some Dave Smith at CCC is having made for sale.
-
Bump
Great advances in 2016 cant stand engineering guys..... :D
-
Thanks guys. I slid them right out of the truck. I may build a rack later to hold the extra cants.
-
Very nice
-
They look 10' or more on that one.
-
Nice Cant stand. I could probably use one of those myself except not quite as big. Those are some long logs you got on there.
-
Nice work Mike !!
What did you use to get the big ones up on that stand ?
-
I'm going to add a couple braces for logs when the metal place opens Monday. There's no flex when I put those in there.
-
I meant end of stand LOL I can see what I wanted here.
She aint going no where Mike. Sweet deal
https://youtu.be/o5VoFwCU9vs
-
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fimages.tapatalk-cdn.com%2F16%2F01%2F01%2F39a1754ef501fb15d566acf652e3974b.jpg&hash=ddceb025d00a340521d3a3a15122fbd0d0b2b3a8)
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fimages.tapatalk-cdn.com%2F16%2F01%2F01%2F7d8acdb542f8ae8111eaecd9e9570922.jpg&hash=3050b63c360b2022af5dc853f0e16691a7969bd1)
-
Just a minute. I think he messed up and give me 10' long.
-
Give us a end shot of that biggun. ;)
-
Good job!
-
8x8.
-
Nice 8)
10x10?
-
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi726.photobucket.com%2Falbums%2Fww268%2Fmdavl%2F0101161227_HDR_zps3515d65q.jpg&hash=3a61d28461db13b560e1c03137e19c1aaf2b0a76) (http://s726.photobucket.com/user/mdavl/media/0101161227_HDR_zps3515d65q.jpg.html)
-
1 ton :)
-
You got a 3/4 or 1 ton to haul it in? LOL
-
There's 38' of 2" in it so far. Be another 16-18' tomorrow. Should be able to hold a truck up.
-
LOL yep. on heavy
-
One side has the angle turned up. I may weld a small loop for putting verticals in on both sides. I kept changing my mind and ran out of angle. Going to get 20' more and make 2 ribs down the middle and then some braces. Going to be a heavy thing when done. It's not far from taking 2 people to move.
-
Need bar in middle IMO. If you ever run 8x8 or 10x10 by themselves and when they get shorter.
-
Sweeeeeeeeeeet 8)
Do you have a back lip? Where cant pulls into?
Wish my cant stand was wider now days for firewood saw testing with the big rounds.
-
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi726.photobucket.com%2Falbums%2Fww268%2Fmdavl%2F12301513162_zpspmhhfyyv.jpg&hash=88409a6c3b7d153536789abbf07829e725fbd5d9) (http://s726.photobucket.com/user/mdavl/media/12301513162_zpspmhhfyyv.jpg.html)
-
Think I'm going to build mine with a 6x3' base and 6' long top 12 or 14" wide. 2x2" angle iron is $2 a foot at the scrap yard. Going to buy cants in 8' or 10' whatever he has when he gets to them this week or next.
Bet you go bigger. ;) Be nice to put 10x10 side by side or 12x12's
I shortened it a foot to go wider up top. I can always go and get more steel and make it longer or make a kicker off the end to get farther off the base. If I have 10' cants I can cut off both ends for about 4'.
-
Think I'm going to build mine with a 6x3' base and 6' long top 12 or 14" wide. 2x2" angle iron is $2 a foot at the scrap yard. Going to buy cants in 8' or 10' whatever he has when he gets to them this week or next.
Bet you go bigger. ;) Be nice to put 10x10 side by side or 12x12's
-
Got all the metal cut today. Will weld it tomorrow.
-
Think I'm going to build mine with a 6x3' base and 6' long top 12 or 14" wide. 2x2" angle iron is $2 a foot at the scrap yard. Going to buy cants in 8' or 10' whatever he has when he gets to them this week or next.
-
TTT
-
I read above 18" to the bottom of the cant, is that the standard height for saw contest or is that just what you made for personal use?
In my area midwest for cold start racing yes (saw not started setting on ground with hands on cant).
Varies everywhere else and depends on show.
-
I read above 18" to the bottom of the cant, is that the standard height for saw contest or is that just what you made for personal use?
-
Here's my cant / log stands I built in development for the last 10 years. Will take round or square log, also verticle block for standing block chop. Just bore cut a slot with chainsaw on bottom end of block for the 4" strap to go through and winch down solid.
Newest ones for ground use will be 6x6" aluminum hinged to fold up flat and 3/4" plywood also hinged to fold in half.
-
Info for new memeber
-
These are the ones the NYS Lumberjack Association use at all of our shows.
They're used for Stock & Hot saws, crosscut, singlebuck, and bowsaws
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy244%2FCaleSigas%2F100_0037.jpg&hash=0b276b9fa62513088e88232bb7d77c241157c658)
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy244%2FCaleSigas%2F100_0035.jpg&hash=b27d111b7296b44094384adb4aae10bf52a57514)
-
it can take round and square wood, 8x8,9x9,12x12...
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi975.photobucket.com%2Falbums%2Fae236%2Fchainsman1%2F006.jpg&hash=8c273c263316d516afa8b1e0de20728ec32c9d19)
-
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi975.photobucket.com%2Falbums%2Fae236%2Fchainsman1%2F013.jpg&hash=23a280fe0a3b6e84bcf0e31179420a22f77df382)
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi975.photobucket.com%2Falbums%2Fae236%2Fchainsman1%2F105.jpg&hash=c6b453a2b8167f5bad0a10507426cd07574a19f2)
-
(https://chainsawrepair.createaforum.com/proxy.php?request=http%3A%2F%2Fi975.photobucket.com%2Falbums%2Fae236%2Fchainsman1%2Fth_014.jpg&hash=4b761414f2e9692976acdca5c0bfb19d3d9e3a41) (http://s975.photobucket.com/albums/ae236/chainsman1/?action=view¤t=014.jpg)
here is mine
-
I need to get one built out of metal similar to that one. That might be a summer project for me.
-
I like how the base is on yours.
I was thinking there was an angle long ways between the legs to lay sandbags on but i like your base much better. No need for sand bags on your stand. Its a good thing you posted pics. :P
-
Well I uploaded them anyway, before I seen your post. :D
[IMG]http://i59.photobucket.com/albums/g289/doemaster789/201T/cantstand5000001.jpg
[IMG]http://i59.photobucket.com/albums/g289/doemaster789/201T/cantstand5000004.jpg
[IMG]http://i59.photobucket.com/albums/g289/doemaster789/201T/cantstand5000003.jpg
[IMG]http://i59.photobucket.com/albums/g289/doemaster789/201T/cantstand5000005.jpg
[IMG]http://i59.photobucket.com/albums/g289/doemaster789/201T/cantstand5000007.jpg
-
I don't think so. I have the parts cut. Just need to assemble now.
-
Sounds great! ;D
Do you need pics?
-
Sounds great! ;D
-
Mine will be metal.
I cant find still pics. Will have to take more and will call and give you measurements over phone sometime. Sound good?
-
Mine will be metal.
-
metal one, stock 7900 with 8T
http://www.youtube.com/watch?v=k5RRdaV8K8E
-
Might have to take still pics. 8x8 on top of 10x10 going opposite ways. stock 3120 with a 9T I believe.
Better one of cants used to make a stand.
http://www.youtube.com/watch?v=nXoMLviUf4A
-
18" to bottom of cant. Mine is a copy of the one sandman made for a ohio gtg a long time ago. Pics or measurements or wait till you come to the gtg?
Also could use 2 8x8 on top of 2 10x10 perfect.
I will show video of both.
-
I'm going to build a cant stand. Is there a standard height to these?