Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: 350XP on March 16, 2014, 01:30:15 pm

Title: Re: mystery cyl
Post by: KilliansRedLeo on March 17, 2014, 01:59:14 pm: You are very welcome, that is what we are all here for, to help!
Title: Re: mystery cyl
Post by: 350XP on March 17, 2014, 01:57:02 pm: thankyou :)
Title: Re: mystery cyl
Post by: SawTroll on March 17, 2014, 01:10:41 pm: Quote from: Cut4fun_ on March 16, 2014, 01:52:43 pm
66 268 open port is my wag

Not much doubt about that! :)
Title: Re: mystery cyl
Post by: KilliansRedLeo on March 17, 2014, 01:08:24 pm: Here pics of a 272 jug with spark plug as you asked for.
Title: Re: mystery cyl
Post by: Eccentric on March 17, 2014, 01:21:46 am: I have a 272XP and 268XP in the shop now (a good friend just found a 300th anniv 268XP for me...........I'm stoked).

If I remember...........I'll shoot a pic or two of them together with the covers off tomorrow. IIRC the jugs look just about identical on the outside, aside from the comp release on the 1996 272XP and no decomp on the 1989 268XP.
Title: Re: mystery cyl
Post by: 350XP on March 16, 2014, 10:08:41 pm: that would be great(with the plug in it). with the SE cover on the 268 the spark plug boot is right on the cover.the XP cover clears the boot
Title: Re: mystery cyl
Post by: KilliansRedLeo on March 16, 2014, 10:03:01 pm: IIRC, the 272 jug is like the 268. I have a 272 jug in the shop. If you would like I can take a picture and post it.
Title: Re: mystery cyl
Post by: 350XP on March 16, 2014, 09:50:58 pm: does anyone know if the angle of the spark plug is the same on the 268 cyl (on the right) and 272??
Title: Re: mystery cyl
Post by: 350XP on March 16, 2014, 06:42:07 pm: all ready used it. can only do it once
Title: Re: mystery cyl
Post by: Cut4fun . on March 16, 2014, 06:31:12 pm: Quote from: KilliansRedLeo on March 16, 2014, 05:39:30 pm
Is the jug so bad off it cannot be saved? You can get a Hyway piston here, on sale for 22$

http://www.hlsproparts.com/Husqvarna-266-piston-and-rings-assembly-p/h31266.htm

Mention this site when ordering and get an extra 10% off.

Type in chainsaw or facebook in the code discount for the 10% off.
Title: Re: mystery cyl
Post by: 350XP on March 16, 2014, 06:25:30 pm: that cyl is kinda bad, i wouldnt trust it to a customer. im just gonna go with a 268 cyl(a closed port one). i should have all the parts needed for the intake swap at work.
Title: Re: mystery cyl
Post by: KilliansRedLeo on March 16, 2014, 05:39:30 pm: Is the jug so bad off it cannot be saved? You can get a Hyway piston here, on sale for 22$

http://www.hlsproparts.com/Husqvarna-266-piston-and-rings-assembly-p/h31266.htm

Mention this site when ordering and get an extra 10% off.
Title: Re: mystery cyl
Post by: 350XP on March 16, 2014, 05:17:17 pm: its scored >:( trying to find a AM 266xp cyl so no mods involved
Title: Re: mystery cyl
Post by: KilliansRedLeo on March 16, 2014, 05:09:41 pm: Cool I'm still with C4F 268 OP on the right 266 on the left both the same B/S 66.7cc 50mm x 34mm. Slab side piston is for the 268 windowed for the 266. The 266 piston appears to be pretty badly scored.
Title: Re: mystery cyl
Post by: 350XP on March 16, 2014, 02:16:43 pm: first pic shows it... yup
Title: Re: mystery cyl
Post by: KilliansRedLeo on March 16, 2014, 02:10:18 pm: agree, does it say Gilardoni on the bottom edge of the casting?
Title: Re: mystery cyl
Post by: Cut4fun . on March 16, 2014, 01:52:43 pm: 66 268 open port is my wag
Title: mystery cyl
Post by: 350XP on March 16, 2014, 01:30:15 pm: they both are 50mm, one is a 266se, what is the open port one? it bolts up the the 266 but the spark plug is to high. and the mystery one has the intake like the 61.