Chainsaw Repair
How To Basics - Carb Fixes + Mods - IPL and Service Manuals => How To Basics and Fixes => Topic started by: 1manband on April 09, 2015, 10:04:02 pm
-
please note....below is a photo of the correct method of math. stroke needs to be divided by two.
as i was putting the numbers into my lottery ping pong ball shaker.....noticed that some strange numbers were being chosen.
anyhow....sorry for posting the error in the first place.
-joe
-
scrap tool idea and use.
lots of room for improvement.
-
Cool!
-
Testing to see what your 1st pic was in. Yours is 96 pixels per square inch. Resize at 72 pixels and you will have bigger pics shown. With the same amount of KB space used.
I went to 72 and resized bigger for test. Man dropped it to 19KB too.
If you are using one of these smart phone thingymbobs. Get the Tapatalk app and it will post pics straight to here and resize them too.
-
You can post larger sized pics if you resize them using 72 instead of 300 that they are taken in. I know my small camera pics are over 1mb per pic in 300. I resize then to 200kb give or take in 72.
-
sorry, was having a difficult time sizing the photos to be able to post them.
will try again.
have an idea to making a jig to hopefully make this process more accurate.
larger photo:
-
So let me get this straight. You put a drill bit into the piston where the wrist pin goes and then measured from the bottom of the drill bit to the top of the nut holding on the flywheel.
Ok I magnified the last picture that has the instructions. Got it, thanks for the info.
-
.