Chainsaw Repair

Saws in Action - GTG Events Competitions - Janka Wood Hardness Scale - World Records - Firewood BTU Comparison Chart => Saws in Action => Topic started by: Cut4fun . on October 11, 2015, 11:14:09 am

Title: Re: Poulan v/s Echo
Post by: ch74 on December 26, 2015, 11:19:08 pm

Yea Cut. That 415 wasn't messing around.

Title: Re: Poulan v/s Echo
Post by: stubnail67 on October 11, 2015, 07:59:22 pm

i love saw videos... that poulan 415 is a beast...................

Title: Re: Poulan v/s Echo
Post by: Cut4fun . on October 11, 2015, 07:36:04 pm

All 3 done. If any times all 4 saws please post to let me know.

Title: Re: Poulan v/s Echo
Post by: Cut4fun . on October 11, 2015, 07:29:54 pm

I want to put this echo 4500 45cc here too. So I can time them all later. Being it was ran in same stick with 3/8LP PS3 yesterday

https://youtu.be/S25Q4NYYLo8

Title: Re: Poulan v/s Echo
Post by: Cut4fun . on October 11, 2015, 06:57:26 pm

I'll post all 3 here when done.

https://youtu.be/vHm7aHP67po
https://youtu.be/Kx2U5HAIfeQ
https://youtu.be/5TIMNNv5BEQ

Title: Re: Poulan v/s Echo
Post by: Cut4fun . on October 11, 2015, 06:20:46 pm

I ran the saws with my other camera to see if it would be easier to do videos and had sound.  There is no comparison of the 6700 to my 415.  But then I thought to myself, I know what the 6700 reminded me of even though 67cc. The 61cc 3800 so I put the same bar and chain on it too.

I ran new never ran LGX 3/8 7 20" in 12" wide 12.5" high ash log. After seeing the 6700 3800 going through the log it makes me impressed with the echo 39cc 45cc with the ps ps3 chain in same wood yesterday. 

Title: Re: Poulan v/s Echo
Post by: Cut4fun . on October 11, 2015, 03:09:24 pm

I may not get to this today after all.

Title: Poulan v/s Echo
Post by: Cut4fun . on October 11, 2015, 11:14:09 am

Going to try and run these today. Poulan 415 65cc all stock against Echo 6700 67cc stock with very slight muffler modding under deflector and bigger 8000 carb on it.

Going to run same chain on both. Think it was a dry hardened ash log I was cutting on yesterday.  I think it is about 12" across.

2 cuts. Can avg cuts or fastest cut. Dont matter to me.

Going to make sure 3/8 7 on both.   Could do 8 in this size wood.