Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Modified Ported Work or Race saws => Topic started by: HolmenTree on March 11, 2018, 11:44:01 am

Title: Re: 2Stroke Stuffing videos
Post by: Al Smith on March 13, 2018, 05:56:23 am

He mentioned a fact I had never thought about before,crankshaft flex . Considering this it explains why Stihl used roller bearings on 020 and 200T's .Going father back in time McCulloch used a roller on one side and a ball bearing on the other .Good info and certainly food for thought .

Title: Re: 2Stroke Stuffing videos
Post by: HolmenTree on March 11, 2018, 02:00:31 pm

This 5 minute redneck video called "Hyper racing crankshaft secret" is brilliant. I knew about this back in the 1980's but didn't bother with it. But now that someone explains it properly I sure will now. ;D

https://youtu.be/FYiWreVyZMc

Title: 2Stroke Stuffing videos
Post by: HolmenTree on March 11, 2018, 11:44:01 am

I've been following this guys videos lately.
Great solid information in a redneck kind of way. ;D
Watch the whole 5 minutes, great video.
https://youtu.be/0hoE_MuFpPI