Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: Cut4fun on September 12, 2012, 10:28:23 am

Title: Poulan 335
Post by: Cut4fun on September 12, 2012, 10:28:23 am
I see there has been new interest in the NOS saws floating around in the PP 335 and 305.

Here is a 335 I used to own with thin rings and type 1. 
 

(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335011.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335007.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335013.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335010.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335008.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335005.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335016.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/CopyofPoulanpro335015.jpg)
Title: Re: Poulan 335
Post by: 3000 FPS on September 20, 2012, 11:55:53 am
One thing I like about the 335 is that it seems to be more compact then some of the other models that Poulan has in the 54 cc range like the 3450, and 330.  I do not know how it compares weight wise because I have never weighed any of them.
Title: Re: Poulan 335
Post by: 3000 FPS on September 20, 2012, 11:59:54 am
 A few pics.
Title: Re: Poulan 335
Post by: Cut4fun . on September 20, 2012, 01:12:47 pm
They 335 3300 are on the poulan 3000 305 platform.  I like the 54cc on the smaller size saw too.

Even though I have and have owned  each listed I have never weighed them either.

Those deals you guys are getting on the NOS 305 and 335 are smoking.  8)

Title: Re: Poulan 335
Post by: rms61moparman on September 20, 2012, 09:28:21 pm

They are an amazing little saw.
A guy can open a LOT of the "saw snobs" eyes with one.
I seem to be getting quite the collection of them now.
I need to find a really good deal on 16" bars for them.


Mike
Title: Re: Poulan 335
Post by: farmboy on September 21, 2012, 08:51:14 am

They are an amazing little saw.
A guy can open a LOT of the "saw snobs" eyes with one.
I seem to be getting quite the collection of them now.
I need to find a really good deal on 16" bars for them.


Mike
Amen on that.  Started my Poulan collection in this series this year.  So far PP285,330,3000 Craftsman, 3300 Craftsman, Sears Best 54cc, 2-3500's.  This is from memory may not have all the #'s right.  Out of series a real nice 3800.  The 330 was a parts saw very very low hr. owner missed the bar adjuster pin and busted the oil tank behind the adjuster.  Will repair it with some Loctite 99913 epoxy.  EHP says it's beter than JB.  Should be an easy fix.  Need a few other parts to complete it.  I'm REALLY liking these saws.  Light nimble and excellent power.
Shep
Title: Re: Poulan 335
Post by: Cut4fun on September 25, 2012, 01:55:13 pm
Mark got the PHO weights of the 335 and 330.    Thanks............ 8)

Title: Re: Poulan 335
Post by: Cut4fun . on April 13, 2014, 08:11:42 pm
NOS Poulan Pro 335 cowroy sold recently. Just saving pics.

(http://i884.photobucket.com/albums/ac46/jrose1/DSC_0003_zpsf4c13a91.jpg)
(http://i884.photobucket.com/albums/ac46/jrose1/DSC_0005_zpsef04b7e5.jpg)
(http://i884.photobucket.com/albums/ac46/jrose1/DSC_0006_zpsc2cfd0ea.jpg)
(http://i884.photobucket.com/albums/ac46/jrose1/DSC_0007_zpse864330f.jpg)
(http://i884.photobucket.com/albums/ac46/jrose1/DSC_0008_zps045afc91.jpg)