Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: H 2 H on November 04, 2012, 12:07:31 am
-
And yes It's a project saw It came in a box
(http://i59.photobucket.com/albums/g317/H2H_PHOTOS/MS%20250/005-3.jpg)
Here is the top of the cylinder
(http://i59.photobucket.com/albums/g317/H2H_PHOTOS/MS%20250/Stihl%20044/012.jpg)
I will be able to save the cylinder after doing some TLC to it
This will be the first 10 mm that I have worked on I didn't know what I had becuase I hadn't seen this type of head before with the angle of the fins ;D
-
Box saw projects are neat in a way. You really get to see what you accomplished when you are done with them. 8) 8)
-
Well they are a lot better if all the pieces are there .
-
Well they are a lot better if all the pieces are there .
There is just about two of everything in the box
But rear handle; seems the guy who had it smashed the handle with his axe
I've been in contact with another guy that has a rear handle but it's from a newer saw
-
Well tell that guy not to beat on a saw with an axe .I've been tempted to at times though myself .
-
Well tell that guy not to beat on a saw with an axe .I've been tempted to at times though myself .
LOL
I found another handle and have piston and rings coming ;)